Megacli创建磁盘raid过程

1、

[root@XXX megactl-0.4.1]# ./megasasctl

a0e32s6      1TiB        ready

a0e32s7      1TiB        ready

2、[root@XXX megactl-0.4.1]# /opt/MegaRAID/MegaCli/MegaCli64 -CfgSpanAdd -r10 -Array0[32:4,32:5] -Array1[32:6,32:7] -a0


Unconfigured Physical Disk(s).


Exit Code: 0x26

3、/opt/MegaRAID/MegaCli/MegaCli64 -pdlist -a0

4、[root@XXX megactl-0.4.1]# /opt/MegaRAID/MegaCli/MegaCli64 -CfgForeign -Scan –a0


There are 3 foreign configuration(s) on controller 0.


Exit Code: 0x00

5、[root@XXX megactl-0.4.1]# /opt/MegaRAID/MegaCli/MegaCli64 -CfgForeign -Clear [a0]


Foreign configuration 0 is cleared on controller 0.
Foreign configuration 1 is cleared on controller 0.
Foreign configuration 2 is cleared on controller 0.


Exit Code: 0x00

6、[root@XXX megactl-0.4.1]# /opt/MegaRAID/MegaCli/MegaCli64 -CfgForeign -Scan –a0


There is no foreign configuration on controller 0.


Exit Code: 0x00

7、/opt/MegaRAID/MegaCli/MegaCli64 -CfgSpanAdd -r10 -Array0[32:4,32:5] -Array1[32:6,32:7] -a0

8、parted -s /dev/sdb -- mklabel gpt mkpart primary 0 100%

9、mkfs.ext3 /dev/sdb1

Megacli创建磁盘raid过程

原文：http://blog.csdn.net/l106439814/article/details/49660991