CUBE: 边界网关
R1与R3代表2个不同的公司
R1的配置如下:
dial-peer voice 3000 voip //dial-peer 路由
destination-pattern 3...
session target ipv4:13.1.1.3
dtmf-relay rtp-nte
codec g711ulaw
!
!
!
gatekeeper
shutdown
!
!
telephony-service
max-ephones 5
max-dn 10
ip source-address 192.168.100.250 port 2000 //R1f0/0的IP地址
auto assign 1 to 2
max-conferences 8 gain -6
transfer-system full-consult
!
!
ephone-dn 1
number 1001
!
!
ephone-dn 2 dual-line
number 1002
!
!
ephone 1
mac-address 0200.4C4F.4F50 ?这个MAC地址是你电脑环回口的mac地址
type CIPC
button 1:1 2:2
CIPC设置如下:
注册完成后CIPC显示的号码
判断R3是否支持CME SIP电话注册:
R3#dir system:/cme
Directory of system:/cme/
156 drwx 0 <no date> sipphone
No space information available
R2的配置:
voice register global
mode cme
source-address 192.168.30.250 port 5060
max-dn 10
max-pool 144
authenticate register
!
voice register dn 1
number 3001
!
voice register pool 1
id mac 0200.4C4F.4F52 ?#3号环回口的mac地址
number 1 dn 1
username fuyi password fuyi
codec g711ulaw
dial-peer voice 1000 voip
destination-pattern 1...
session protocol sipv2
session target ipv4:13.1.1.1
dtmf-relay sip-notify
codec g711ulaw
SIP电话注册:
配置对比:
CUBE的配置
R3/1#sh run | se voice service
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
本文出自 “Erick WAY” 博客，谢绝转载！
Voice LAB-1 CUBE Cisco Unified Border Element
原文：http://ericfu.blog.51cto.com/416760/1725825