这是我自学程序以来在博客园的第一遍博客，如有不好的地方请大家指正，谢谢！
这边文章的目的是给予那些在PCB使用Genesis2000程序脚本开发的人员提供.net平台下的开发方法。
目前genesis脚本的开发的语言主要为cshell，perl和tcl，相对于学过c#的人需要学习成本，网我打听厅过用C#开发脚本的接口的价格最少都需要1000块钱，本着开源的思想我吧这几天研究的成果公布发表给大家！
1.genesis脚本的运行机制（这里拿cshell来说），（以我的电脑来举例子）首先程序要运行c:\genesis\e100\all\scr_start.csh,然后运行c:\genesis\sys\hooks\script_start.csh，最后再运行脚本；
详细看附件
2.不管怎么样子的脚本都是基于命令行的，如windows上的cmd；
知道了这两个条件下面我们开始编写genesis辅助类
using System;
using System.Diagnostics;
using System.IO;
using System.Runtime.InteropServices;
public class Genesis
{
public string prefix, lmc, msg;
public string READANS, COMANS, PAUSANS, MOUSEANS;
public int STATUS=0;
public System.IO.StreamReader conv;
public System.IO.StreamReader @in;
public Genesis()
{
//exe程序发送指令需要已这个字符串开头，genesis才会识别
this.prefix = "@%#%@";
this.blank();
return;
}
public virtual void blank()
{
this.STATUS = 0;
this.READANS = "";
this.COMANS = "";
this.PAUSANS = "";
this.MOUSEANS = "";
return;
}
/// <summary>
/// 执行指令
/// </summary>
/// <param name="cmd"></param>
/// <param name="arg"></param>
/// <returns></returns>
public virtual int sendCmd(string cmd, string arg)
{
this.blank();
this.lmc = this.prefix + cmd + " " + arg + "\n";
Console.Write(this.lmc);
return 0;
}
/// <summary>
/// 执行genesis2000 line mode command动作
/// </summary>
/// <param name="arg">指令</param>
/// <returns></returns>
public virtual int COM(string arg)
{
this.sendCmd("COM", arg);
try
{
int.TryParse(Console.ReadLine(),out STATUS);
this.COMANS = Console.ReadLine();
this.READANS = this.COMANS;
}
catch (IOException e)
{
Console.WriteLine("IO Error: " + e.Message);
}
return this.STATUS;
}
/// <summary>
/// 用于暂停当前运行程序，等待用户做其它动作后继续执行程序或无条件退出程序。
/// </summary>
/// <param name="msg"></param>
/// <returns></returns>
public virtual int PAUSE(string msg)
{
this.sendCmd("PAUSE", msg);
try
{
int.TryParse(Console.ReadLine(), out this.STATUS);
this.READANS = Console.ReadLine();
this.PAUSANS = Console.ReadLine();
}
catch (IOException e)
{
Console.WriteLine("IO Error: " + e.Message);
}
return this.STATUS;
}
/// <summary>
/// 设置活动工作界面
/// </summary>
/// <param name="arg">指令</param>
/// <returns></returns>
public virtual int AUX(string arg)
{
this.sendCmd("AUX", msg);
try
{
//this.STATUS = this.in.readLine();
this.STATUS = int.Parse(Console.ReadLine());
this.COMANS = Console.ReadLine();
}
catch (IOException e)
{
Console.WriteLine("IO Error: " + e.Message);
}
return this.STATUS;
}
/// <summary>
/// 用于获取鼠标点击位置坐标。
/// </summary>
/// <param name="msg"></param>
/// <param name="mode"></param>
/// <returns></returns>
public virtual int MOUSE(string msg, string mode)
{
this.sendCmd("MOUSE " + mode, msg);
try
{
int.TryParse(Console.ReadLine(),out STATUS);
this.READANS = Console.ReadLine();
this.MOUSEANS = Console.ReadLine();
}
catch (IOException e)
{
Console.WriteLine("IO Error: " + e.Message);
}
return this.STATUS;
}
/// <summary>
/// 指令的主要目的是当我们有些程序需要用超级用户才能执行的时候，我们用SU_ON打开超级用户，然后执行程序。
/// </summary>
/// <returns></returns>
public virtual int SU_ON()
{
this.sendCmd("SU_ON", "");
return 0;
}
/// <summary>
/// 为退出由SU_ON打开的超级用户模式
/// </summary>
/// <returns></returns>
public virtual int SU_OFF()
{
this.sendCmd("SU_OFF", "");
return 0;
}
/// <summary>
/// VON主要用于取得VOF的结果，然后执行其它的一些指令
/// </summary>
/// <returns></returns>
public virtual int VON()
{
this.sendCmd("VON", "");
return 0;
}
/// <summary>
/// 该指令主要用于设置执行有可能出现错误的动作，并利用status得到结果，并经常结合VON使用
/// </summary>
/// <returns></returns>
public virtual int VOF()
{
this.sendCmd("VOF", "");
return 0;
}
}
有了这个类我们的开发就可以开始了，打开vs，新建一个控制台程序
添加一个Form
在program类里面的main函数里面添加如下的代码
Application.Run(new Form1());
在form里面添加一个按钮来测试代码
双击开始按钮写双击事件的代码
private void button1_Click(object sender, EventArgs e)
{
string dbname = "genesis";
string jobname = textBox1.Text;
Console.WriteLine("Instantiated the Genesis Object...");
string msg = "Welcome to the Java test Script...apparently its working...";
Console.WriteLine(msg);
gen.PAUSE(msg);
gen.COM("create_entity,job=,is_fw=no,type=job,name=" + jobname + ",db=" + dbname + ",fw_type=form");
gen.COM("clipb_open_job,job=" + jobname + ",update_clipboard=view_job");
gen.COM("open_job,job=" + jobname);
gen.COM("open_entity,job=" + jobname + ",type=matrix,name=matrix,iconic=no");
gen.COM("matrix_add_step,job=" + jobname + ",matrix=matrix,step=test,col=1");
gen.COM("matrix_add_layer,job=" + jobname + ",matrix=matrix,layer=lay1,row=1,context=board,type=signal,polarity=positive");
gen.COM("matrix_add_layer,job=" + jobname + ",matrix=matrix,layer=lay2,row=2,context=board,type=signal,polarity=positive");
string msg2 = "Now we‘ll open the newly created step...";
Console.WriteLine(msg2);
gen.PAUSE(msg2);
gen.COM("open_entity,job=" + jobname + ",type=step,name=test,iconic=no");
string group = gen.COMANS;
gen.PAUSE("Group number is " + group);
gen.COM("units,type=inch");
gen.COM("display_layer,name=lay1,display=yes,number=1");
gen.COM("work_layer,name=lay1");
gen.COM("display_layer,name=lay2,display=yes,number=2");
gen.COM("profile_rect,x1=0,y1=0,x2=5,y2=5");
gen.COM("zoom_home");
gen.COM("add_line,attributes=no,xs=0.6239601378,ys=0.5049917323,xe=4.6505824803,ye=4.5865225394,symbol=r40,polarity=positive");
gen.COM("work_layer,name=lay2");
gen.COM("add_line,attributes=no,xs=0.5049917323,ys=4.4675541339,xe=4.4584027559,ye=0.4409318898,symbol=r40,polarity=positive");
gen.MOUSE("Click a point", "p");
Console.WriteLine("Mouseans : " + gen.MOUSEANS);
Console.WriteLine("Checking return of Genesis object...");
Console.WriteLine("genStatus : " + Convert.ToString(gen.STATUS));
Console.WriteLine("genComans : " + gen.COMANS);
string msg3 = "Now we‘ll clean up...";
Console.WriteLine(msg3);
gen.PAUSE(msg3);
gen.COM("check_inout,mode=in,type=job,job=" + jobname);
gen.COM("close_job,job=" + jobname);
gen.COM("close_form,job=" + jobname);
gen.COM("close_flow,job=" + jobname);
gen.COM("delete_entity,job=,type=job,name=" + jobname);
Console.WriteLine("genStatus : " + Convert.ToString(gen.STATUS));
Console.WriteLine("genComans : " + gen.COMANS);
string msg4 = "Thats it...";
Console.WriteLine(msg4);
gen.PAUSE(msg4);
Application.Exit();
}
genesis和程序之间的通讯都是通过Console类来实现的
现在程序写好了，但在测试程序之前我们需要把src_start.csh文件修改一下让它支持直接实行EXE文件
#!/bin/csh
#
# Mike J. Hopkins
# Genesis 2000 scr_start.csh
# revision 1.4.1
#
# This version of the scr_start.csh script includes
# support for the Python programming language,
# as well as Java and binary execuables...
#
#
if($?GENESIS_DIR)then
set _genesis_root=$GENESIS_DIR
else
set _genesis_root=/genesis
endif
if($?GENESIS_EDIR)then
set _genesis_edir=$GENESIS_EDIR
else
set _genesis_edir=e$GENESIS_VER
endif
if($_genesis_edir =~ /* || $_genesis_edir =~ ?:*)then
set path=($_genesis_edir/all $path)
else
set path=($_genesis_root/$_genesis_edir/all $path)
endif
set STATUS=0
set PROG=$1
if(! -e $PROG)then
set PROG_STATUS=1
goto end
endif
# define aliases
set DIR_PREFIX=‘@%#%@‘
alias VON ‘echo "${DIR_PREFIX}VON";‘
alias VOF ‘echo "${DIR_PREFIX}VOF";‘
alias SU_ON ‘echo "${DIR_PREFIX}SU_ON";‘
alias SU_OFF ‘echo "${DIR_PREFIX}SU_OFF";‘
alias PAUSE ‘echo "${DIR_PREFIX}PAUSE \!:*"; \ set STATUS=$<; set READANS=$<; set PAUSANS=$<; \ if ($PAUSANS != "OK") exit‘
alias MOUSE ‘echo "${DIR_PREFIX}MOUSE \!:*"; \ set STATUS=$<; set READANS=$<; set MOUSEANS="$<"‘
alias COM ‘echo "${DIR_PREFIX}COM \!:*"; \ set STATUS=$<; set READANS="$<"; set COMANS=($READANS)‘
alias AUX ‘echo "${DIR_PREFIX}AUX \!:*"; \ set STATUS=$<; set READANS="$<"; set COMANS=($READANS)‘
set argv = ($2)
#executing hook script
if(-e $_genesis_root/sys/hooks/script_start.csh)then
source $_genesis_root/sys/hooks/script_start.csh
endif
# check first line of program
set _HEAD=`head -1 $PROG`
set _EXT=`echo $PROG:e`
if("$_HEAD" =~ *perl*)then
echo "Executing Perl Program $PROG $argv"
perl $PROG $argv
set PROG_STATUS=$status
else if("$_HEAD" =~ *python*)then
echo "Executing Python Program $PROG $argv"
python $PROG $argv
set PROG_STATUS=$status
else if("$_HEAD" =~ *wish*)then
setenv TCSHONLYSTARTEXES 1
echo "Executing TCL Program $PROG $argv"
$_genesis_root/sys/hooks/wish_start.tcl $PROG $argv
set PROG_STATUS=$status
else if ("$_EXT" =~ [Cc][Ll][Aa][Ss][Ss]) then
set JPATH = `echo $PROG:h`
set JPROG = `echo $PROG:t`
set JCLASS = `echo $JPROG:r`
setenv CLASSPATH $JPATH
echo "Set CLASSPATH to: $CLASSPATH"
echo "Executing JavaClass $JCLASS $argv"
echo "..."
java $JCLASS $argv
set PROG_STATUS=$status
else if ("$_EXT" =~ [Ee][Xx][Ee]) then
echo "Executing Compiled Program $PROG $argv"
$PROG $argv
set PROG_STATUS=$status
else
echo "Executing C Shell Program $PROG"
source $PROG
set PROG_STATUS=$status
endif
end:
exit($PROG_STATUS)
改好保存下面可以打开genesis运行脚本了
在文本框里面输入想要新建的工作名称点击开始按钮运行
程序写到这里就完成了！有不明白的可以联系我！307209239@qq.com
原文：http://www.cnblogs.com/lidezhen/p/5118392.html