##save as /etc/sysconfig/iptables,then /etc/init.d/iptables restart |start
# Firewall configuration written by redhat-config-securitylevel
*filter
:INPUT DROP [0:0]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
:RH-Firewall-1-INPUT - [0:0]
-A INPUT -j RH-Firewall-1-INPUT
-A FORWARD -j RH-Firewall-1-INPUT
-A RH-Firewall-1-INPUT -i lo -j ACCEPT
-A RH-Firewall-1-INPUT -p icmp --icmp-type any -j ACCEPT
-A RH-Firewall-1-INPUT -p tcp -m tcp --tcp-flags FIN,SYN FIN,SYN -j DROP
-A RH-Firewall-1-INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT
-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 2222 -j ACCEPT
#
-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 80 -j ACCEPT
-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 443 -j ACCEPT
#
-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 3306 -j ACCEPT
#
-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 8081 -j ACCEPT
-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 8088 -j ACCEPT
#
-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 53 -j ACCEPT
-A RH-Firewall-1-INPUT -m state --state NEW -m udp -p udp --dport 53 -j ACCEPT
#
-A RH-Firewall-1-INPUT -s xxx.xxx.xxx.xxx -j ACCEPT
#
-A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp -s --dport 6666 -j ACCEPT
-A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp -s xxx.xxx.xxx.xxx --dport port1 -j ACCEPT
#
#
-A RH-Firewall-1-INPUT -j REJECT --reject-with icmp-host-prohibited
COMMIT
#
本文出自 “WoSec” 博客，转载请与作者联系！
原文：http://pathyon.blog.51cto.com/9465112/1737034