首页 > 数据库技术 > 详细

sqlserver游标使用误区

时间:2016-04-20 19:47:27      阅读:287      评论:0      收藏:0      [点我收藏+]

在使用游标出现逻辑错误时,查阅资料,只有改掉while中的游标取值在while循环最后,没有说明while以前会出现的错误,而且没有具体说明原因,今天在工作中解决了这个问题,写了这个博客,希望对使用游标少的园友有帮助,也给自己提个醒。

按照游标的规则使用时,在使用游标取到数据时后进行操作在逻辑上正确,但是会造成数据异常,在正常流程下逻辑正确,所以很难发现其中的逻辑错误,下面是工作时的例子,以及解决的具体流程。

好久没用游标,今天查了下资料开始使用,但是出现问题:

--插入客户信息
create synonym synonym_project for [192.168.159.134].[VisualNet].[dbo].project
declare @prjkey varchar(50)
declare @customername varchar(50)
declare @khbh char(4)

declare cursor_project cursor for
select prjname,prjkey from synonym_project

open cursor_project

fetch next from cursor_project into @customername,@prjkey

if not exists(select 1 from Customers where gsmc = @customername)
select @khbh = MAX(khbh)+1 from Customers
insert into Customers(khbh,gsmc,gsdz,gsdh) values(@khbh,@customername,‘‘,‘‘)

while @@FETCH_STATUS=0
begin
    fetch next from cursor_project into @customername,@prjkey
    
    if not exists(select 1 from Customers where gsmc = @customername)
    select @khbh = MAX(khbh)+1 from Customers
    insert into Customers(khbh,gsmc,gsdz,gsdh) values(@khbh,@customername,‘‘,‘‘)
    
end

close cursor_project
deallocate cursor_project

drop synonym synonym_project

  这里使用同义词和游标远程查询数据。

 

  因为:

open cursor_project

fetch next from cursor_project into @customername,@prjkey

  打开游标后需要先取一条数据才能进行while循环读取,所以我在取到数据后进行插入操作 

  然后while循环中也会再进行数据读取,在读取后再进行插入操作。

 

  但是执行后发生错误:违反唯一约束

  我查看了远程表,所有的数据都完整的插入到表中,并没有遗失的数据,不知道从哪里多了一条数据,所以讲数据处理换为打印查看数据: 

--插入客户信息
create synonym synonym_project for [192.168.159.134].[VisualNet].[dbo].project
declare @prjkey varchar(50)
declare @customername varchar(50)
declare @khbh char(4)

declare cursor_project cursor for
select prjname,prjkey from synonym_project

open cursor_project

fetch next from cursor_project into @customername,@prjkey
print @customername

while @@FETCH_STATUS=0
begin
    fetch next from cursor_project into @customername,@prjkey
    print @customername
    
end

close cursor_project
deallocate cursor_project

drop synonym synonym_project

  结果如下:

Test1                                             
南通心智慧                                        
港闸区                                            
港闸区      

  但是在远程表中‘港闸区‘只有一个,所以是最后一条数据重复了,然后百度一下看看别人是不是出现过:http://zhidao.baidu.com/link?url=wNi65XcABENt3DV_VJJHILlHWTNYdsMYzX7b25RmGACPIwsLjAUkWVz0qIFzlfwC7fK5S5-71t5196I5wJ4gRa

 

  回答是说取数据应该是在while后面,所以我把游标获取数据放在循环最后: 

--插入客户信息
create synonym synonym_project for [192.168.159.134].[VisualNet].[dbo].project
declare @prjkey varchar(50)
declare @customername varchar(50)
declare @khbh char(4)

declare cursor_project cursor for
select prjname,prjkey from synonym_project

open cursor_project

fetch next from cursor_project into @customername,@prjkey
print @customername

while @@FETCH_STATUS=0
begin
    
    print @customername
    fetch next from cursor_project into @customername,@prjkey
end

close cursor_project
deallocate cursor_project

drop synonym synonym_project

  运行结果:

Test1                                             
Test1                                             
南通心智慧                                        
港闸区                                            

  发现第一条数据重复,也就是说两次打印有一次是多余的,因为要遍历数据,所以循环里面的打印肯定是必须的,上面的打印可能是多余的,如果把上面的打印删除,游标取数据在打印之后,循环内部打印在游标取数据之前,就不会有上一条数据丢失:

--插入客户信息
create synonym synonym_project for [192.168.159.134].[VisualNet].[dbo].project
declare @prjkey varchar(50)
declare @customername varchar(50)
declare @khbh char(4)

declare cursor_project cursor for
select prjname,prjkey from synonym_project

open cursor_project

fetch next from cursor_project into @customername,@prjkey

while @@FETCH_STATUS=0
begin
    
    print @customername
    fetch next from cursor_project into @customername,@prjkey
end

close cursor_project
deallocate cursor_project

drop synonym synonym_project

  结果如下:

Test1                                             
南通心智慧                                        
港闸区                                            

  这样就正确了,相同于打印, 对数据进行插入操作的逻辑也是这样,讲打印改成需要的数据操作:

--插入客户信息
        create synonym synonym_project for [192.168.159.134].[VisualNet].[dbo].project
        declare @prjkey varchar(50)
        declare @customername varchar(50)
        declare @khbh char(4)
        
        declare cursor_project cursor for
        select prjname,prjkey from synonym_project
        
        open cursor_project
        
        fetch next from cursor_project into @customername,@prjkey
        
        while @@FETCH_STATUS=0
        begin
            
            if not exists(select 1 from Customers where gsmc = @customername)
            select @khbh = MAX(khbh)+1 from Customers
            insert into Customers(khbh,gsmc,gsdz,gsdh) values(@khbh,@customername,‘‘,‘‘)
            fetch next from cursor_project into @customername,@prjkey
        end
        
        close cursor_project
        deallocate cursor_project

  这样就正确了,对游标使用很少经常会出现这个问题,因为普通的逻辑就会出现最后数据重复,必须使用游标的逻辑格式。

 

sqlserver游标使用误区

原文:http://www.cnblogs.com/xiaoguangit/p/5413808.html

(0)
(0)
   
举报
评论 一句话评论(0
关于我们 - 联系我们 - 留言反馈 - 联系我们:wmxa8@hotmail.com
© 2014 bubuko.com 版权所有
打开技术之扣,分享程序人生!