检查和收集 Linux 硬件信息的 7 个命令

时间：2014-05-19 09:30:43 阅读：693 评论：0 收藏：0 [点我收藏+]

http://blog.sae.sina.com.cn/archives/3910

在Linux系统中，有许多命令可用于查询主机的硬件信息。一些命令只针对特定的硬件组件，比如CPU、内存，一些命令可以查询多个硬件信息。

这篇文章只是简单的让每个人了解查询硬件信息的基本命令使用，包括lscpu、hwinfo、lshw、lspci、lsblk、lsusb等等。

1. lscpu用于查询CPU信息

[root@devops ~]# lscpu
Architecture:          x86_64
CPU op-mode(s):        32-bit, 64-bit
Byte Order:            Little Endian
CPU(s):                1
On-line CPU(s) list:   0
Thread(s) per core:    1
Core(s) per socket:    1
CPU socket(s):         1
NUMA node(s):          1
Vendor ID:             GenuineIntel
CPU family:            6
Model:                 45
Stepping:              7
CPU MHz:               2194.842
BogoMIPS:              4389.68
Hypervisor vendor:     Xen
Virtualization type:   full
L1d cache:             32K
L1i cache:             32K
L2 cache:              256K
L3 cache:              15360K
NUMA node0 CPU(s):     0

[root@devops ~]# lscpu

Architecture: x86_64

CPU op-mode(s): 32-bit, 64-bit

Byte Order: Little Endian

CPU(s): 1

On-line CPU(s) list: 0

Thread(s) per core: 1

Core(s) per socket: 1

CPU socket(s): 1

NUMA node(s): 1

Vendor ID: GenuineIntel

CPU family: 6

Model: 45

Stepping: 7

CPU MHz: 2194.842

BogoMIPS: 4389.68

Hypervisor vendor: Xen

Virtualization type: full

L1d cache: 32K

L1i cache: 32K

L2 cache: 256K

L3 cache: 15360K

NUMA node0 CPU(s): 0

2. lshw显示硬件信息表

这个命令应用普遍，它可通过个人需求而列出多种不同的硬件参数：CPU、内存、硬盘、USB控制器、lshw卡片等等，本质上就是从/proc目录不同文件中中提取对应的硬件信息。

按照下面的步骤去安装lshw工具，然后就可以使用了。

 wget http://ezix.org/software/files/lshw-B.02.14.tar.gz
 tar -zxvf lshw-B.02.14.tar.gz
 cd lshw-B.02.14
 make &amp;&amp; make install

wget http://ezix.org/software/files/lshw-B.02.14.tar.gz

tar -zxvf lshw-B.02.14.tar.gz

cd lshw-B.02.14

make && make install

示例：

[root@devops lshw-B.02.14]# lshw -short
H/W path          Device       Class      Description
=====================================================
                               system     HVM domU
/0                             bus        Motherboard
/0/0                           memory     96KiB BIOS
/0/1                           processor  Intel(R) Xeon(R) CPU E5-2430 0 @ 2.20GHz
/0/2                           memory     System Memory
/0/2/0                         memory     512MiB DIMM RAM
/0/2/1                         memory     512MiB DIMM RAM
/0/3                           memory     96KiB BIOS
/0/4                           processor  CPU
/0/5                           memory     System Memory
/0/6                           memory     
/0/7                           memory     
/0/100                         bridge     440FX - 82441FX PMC [Natoma]
/0/100/1                       bridge     82371SB PIIX3 ISA [Natoma/Triton II]
/0/100/1.1        scsi1        storage    82371SB PIIX3 IDE [Natoma/Triton II]
/0/100/1.1/0.0.0  /dev/cdrom1  disk       SCSI CD-ROM
/0/100/1.2                     bus        82371SB PIIX3 USB [Natoma/Triton II]
/0/100/1.2/1      usb1         bus        UHCI Host Controller
/0/100/1.2/1/2                 input      QEMU USB Tablet
/0/100/1.3                     bridge     82371AB/EB/MB PIIX4 ACPI
/0/100/2                       display    GD 5446
/0/100/3                       generic    Xen Platform Device
/1                eth0         network    Ethernet interface
/2                eth1         network    Ethernet interface
[root@devops lshw-B.02.14]#

[root@devops lshw-B.02.14]# lshw -short

H/W path Device Class Description

=====================================================

system HVM domU

/0 bus Motherboard

/0/0 memory 96KiB BIOS

/0/1 processor Intel(R) Xeon(R) CPU E5-2430 0 @ 2.20GHz

/0/2 memory System Memory

/0/2/0 memory 512MiB DIMM RAM

/0/2/1 memory 512MiB DIMM RAM

/0/3 memory 96KiB BIOS

/0/4 processor CPU

/0/5 memory System Memory

/0/6 memory

/0/7 memory

/0/100 bridge 440FX - 82441FX PMC [Natoma]

/0/100/1 bridge 82371SB PIIX3 ISA [Natoma/Triton II]

/0/100/1.1 scsi1 storage 82371SB PIIX3 IDE [Natoma/Triton II]

/0/100/1.1/0.0.0 /dev/cdrom1 disk SCSI CD-ROM

/0/100/1.2 bus 82371SB PIIX3 USB [Natoma/Triton II]

/0/100/1.2/1 usb1 bus UHCI Host Controller

/0/100/1.2/1/2 input QEMU USB Tablet

/0/100/1.3 bridge 82371AB/EB/MB PIIX4 ACPI

/0/100/2 display GD 5446

/0/100/3 generic Xen Platform Device

/1 eth0 network Ethernet interface

/2 eth1 network Ethernet interface

[root@devops lshw-B.02.14]#

3. hwinfo-硬件信息

hwinfo类似于lshw，也能查询硬件信息，且应用广泛。它也能输出多个硬件部分的详细或者简要信息，但是不同的是有时hwinfo比lshw的信息更详细。

默认情况下，Linux系统没有安装hwinfo工具，所以你需要按照以下步骤自己安装：

CentOS 6

#rpm -Uvh http://mirror.symnds.com/distributions/gf/el/6/gf/x86_64/gf-release-6-6.gf.el6.noarch.rpm
#yum list hwinfo
#yum install hwinfo

#rpm -Uvh http://mirror.symnds.com/distributions/gf/el/6/gf/x86_64/gf-release-6-6.gf.el6.noarch.rpm

#yum list hwinfo

#yum install hwinfo

CentOS 5

#rpm -Uvh http://mirror.symnds.com/distributions/gf/el/5/gf/x86_64/gf-release-5-6.gf.el5.noarch.rpm
#yum list hwinfo
#yum install hwinfo

#rpm -Uvh http://mirror.symnds.com/distributions/gf/el/5/gf/x86_64/gf-release-5-6.gf.el5.noarch.rpm

#yum list hwinfo

#yum install hwinfo

[root@devops tmp]# rpm -Uvh http://mirror.symnds.com/distributions/gf/el/6/gf/x86_64/gf-release-6-6.gf.el6.noarch.rpm
Retrieving http://mirror.symnds.com/distributions/gf/el/6/gf/x86_64/gf-release-6-6.gf.el6.noarch.rpm
warning: /var/tmp/rpm-tmp.m2mMAO: Header V4 RSA/SHA1 Signature, key ID 13a4d2a9: NOKEY
Preparing...                ########################################### [100%]
   1:gf-release             ########################################### [100%]
[root@devops tmp]# yum list hwinfo
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
 * base: mirrors.aliyun.com
 * extras: mirrors.aliyun.com
 * updates: mirrors.aliyun.com
gf                                                                                                    

 00:00     
gf/primary_db                                                                                     

 00:00     
Available Packages
hwinfo.x86_64
[root@devops tmp]# yum list hwinfo
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
 * base: mirrors.aliyun.com
 * extras: mirrors.aliyun.com
 * updates: mirrors.aliyun.com
gf                                                                                                   

 00:00     
gf/primary_db                                                                                          

 00:00     
Available Packages
hwinfo.x86_64                                                20.2-1.gf.el6

[root@devops tmp]# rpm -Uvh http://mirror.symnds.com/distributions/gf/el/6/gf/x86_64/gf-release-6-6.gf.el6.noarch.rpm

Retrieving http://mirror.symnds.com/distributions/gf/el/6/gf/x86_64/gf-release-6-6.gf.el6.noarch.rpm

warning: /var/tmp/rpm-tmp.m2mMAO: Header V4 RSA/SHA1 Signature, key ID 13a4d2a9: NOKEY

Preparing... ########################################### [100%]

1:gf-release ########################################### [100%]

[root@devops tmp]# yum list hwinfo

Loaded plugins: fastestmirror

Loading mirror speeds from cached hostfile

* base: mirrors.aliyun.com

* extras: mirrors.aliyun.com

* updates: mirrors.aliyun.com

00:00

gf/primary_db

00:00

Available Packages

hwinfo.x86_64

[root@devops tmp]# yum list hwinfo

Loaded plugins: fastestmirror

Loading mirror speeds from cached hostfile

* base: mirrors.aliyun.com

* extras: mirrors.aliyun.com

* updates: mirrors.aliyun.com

00:00

gf/primary_db

00:00

Available Packages

hwinfo.x86_64 20.2-1.gf.el6

[root@devops tmp]# yum install hwinfo
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
 * base: mirrors.aliyun.com
 * extras: mirrors.aliyun.com
 * updates: mirrors.aliyun.com
Setting up Install Process
Resolving Dependencies
--&gt; Running transaction check
---&gt; Package hwinfo.x86_64 0:20.2-1.gf.el6 will be installed
.....

[root@devops tmp]# yum install hwinfo

Loaded plugins: fastestmirror

Loading mirror speeds from cached hostfile

* base: mirrors.aliyun.com

* extras: mirrors.aliyun.com

* updates: mirrors.aliyun.com

Setting up Install Process

Resolving Dependencies

--> Running transaction check

---> Package hwinfo.x86_64 0:20.2-1.gf.el6 will be installed

.....

示例：

[root@devops tmp]# hwinfo -short
oops: don&amp;#039;t know what to do with "short"
[root@devops tmp]# hwinfo --short
cpu:                                                            
                       Intel(R) Xeon(R) CPU E5-2430 0 @ 2.20GHz, 2194 MHz
keyboard:
  /dev/input/event3    AT Translated Set 2 keyboard
  /dev/ttyS0           serial console
mouse:
  /dev/input/mice      Adomax QEMU USB Tablet
  /dev/input/mice      Macintosh mouse button emulation
  /dev/input/mice      ImExPS/2 Generic Explorer Mouse
graphics card:
                       Cirrus Logic GD 5446
storage:
                       Intel 82371SB PIIX3 IDE [Natoma/Triton II]
                       Xen Virtual Storage 0
                       Xen Virtual Storage 1
                       Xen Virtual Storage 2
network:
  eth0                 Xen Virtual Ethernet Card 0
  eth1                 Xen Virtual Ethernet Card 1
network interface:
  lo                   Loopback network interface
  eth0                 Ethernet network interface
  eth1                 Ethernet network interface
disk:
  /dev/xvda            Disk
  /dev/xvdb            Disk
partition:
  /dev/xvda1           Partition
  /dev/xvdb1           Partition
cdrom:
  /dev/sr0             QEMU DVD-ROM
usb controller:
                       Qumranet Qemu virtual machine
bios:
                       BIOS
bridge:
                       Qumranet Qemu virtual machine
                       Qumranet Qemu virtual machine
                       Qumranet Qemu virtual machine
hub:
                       Linux 2.6.32-279.el6.x86_64 uhci_hcd UHCI Host Controller
memory:
                       Main Memory
unknown:
                       FPU
                       DMA controller
                       PIC
                       Timer
                       Keyboard controller
                       XenSource Xen Platform Device
[root@devops tmp]#

[root@devops tmp]# hwinfo -short

oops: don&#039;t know what to do with "short"

[root@devops tmp]# hwinfo --short

cpu:

Intel(R) Xeon(R) CPU E5-2430 0 @ 2.20GHz, 2194 MHz

keyboard:

/dev/input/event3 AT Translated Set 2 keyboard

/dev/ttyS0 serial console

mouse:

/dev/input/mice Adomax QEMU USB Tablet

/dev/input/mice Macintosh mouse button emulation

/dev/input/mice ImExPS/2 Generic Explorer Mouse

graphics card:

Cirrus Logic GD 5446

storage:

Intel 82371SB PIIX3 IDE [Natoma/Triton II]

Xen Virtual Storage 0

Xen Virtual Storage 1

Xen Virtual Storage 2

network:

eth0 Xen Virtual Ethernet Card 0

eth1 Xen Virtual Ethernet Card 1

network interface:

lo Loopback network interface

eth0 Ethernet network interface

eth1 Ethernet network interface

disk:

/dev/xvda Disk

/dev/xvdb Disk

partition:

/dev/xvda1 Partition

/dev/xvdb1 Partition

cdrom:

/dev/sr0 QEMU DVD-ROM

usb controller:

Qumranet Qemu virtual machine

bios:

BIOS

bridge:

Qumranet Qemu virtual machine

hub:

Linux 2.6.32-279.el6.x86_64 uhci_hcd UHCI Host Controller

memory:

Main Memory

unknown:

FPU

DMA controller

PIC

Timer

Keyboard controller

XenSource Xen Platform Device

[root@devops tmp]#

4. lspci

lsppci命令可列出PCI总线的信息以及连接到PCI总线上的设备信息，比如VGA适配器、SATA控制器、其他模块等等。lspci工具是pciutils包的一部分，所以在安装lspci之前，你需要安装pciutils包。

安装pciutils包使用下面的命令：

#yum install pciutils

1	#yum install pciutils

[root@devops tmp]# yum install pciutils
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
 * base: mirrors.aliyun.com
 * extras: mirrors.aliyun.com
 * updates: mirrors.aliyun.com
Setting up Install Process
Resolving Dependencies
--&gt; Running transaction check
---&gt; Package pciutils.x86_64 0:3.1.10-2.el6 will be installed
--&gt; Processing Dependency: pciutils-libs = 3.1.10-2.el6 for package: pciutils-3.1.10-2.el6.x86_64
--&gt; Running transaction check
---&gt; Package pciutils-libs.x86_64 0:3.1.4-11.el6 will be updated
---&gt; Package pciutils-libs.x86_64 0:3.1.10-2.el6 will be an update
--&gt; Finished Dependency Resolution

Dependencies Resolved

Installing:
 pciutils                         x86_64                    3.1.10-2.el6               

      85 k
Updating for dependencies:
 pciutils-libs                    x86_64                    3.1.10-2.el6                 

      34 k

.....  

Dependency Updated:
  pciutils-libs.x86_64 0:3.1.10-2.el6                                                                            

Complete!

[root@devops tmp]# yum install pciutils

Loaded plugins: fastestmirror

Loading mirror speeds from cached hostfile

* base: mirrors.aliyun.com

* extras: mirrors.aliyun.com

* updates: mirrors.aliyun.com

Setting up Install Process

Resolving Dependencies

--> Running transaction check

---> Package pciutils.x86_64 0:3.1.10-2.el6 will be installed

--> Processing Dependency: pciutils-libs = 3.1.10-2.el6 for package: pciutils-3.1.10-2.el6.x86_64

--> Running transaction check

---> Package pciutils-libs.x86_64 0:3.1.4-11.el6 will be updated

---> Package pciutils-libs.x86_64 0:3.1.10-2.el6 will be an update

--> Finished Dependency Resolution

Dependencies Resolved

Installing:

pciutils x86_64 3.1.10-2.el6

85 k

Updating for dependencies:

pciutils-libs x86_64 3.1.10-2.el6

34 k

.....

Dependency Updated:

pciutils-libs.x86_64 0:3.1.10-2.el6

Complete!

示例：

[root@devops tmp]# lspci 
00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02)
00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II]
00:01.1 IDE interface: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II]
00:01.2 USB controller: Intel Corporation 82371SB PIIX3 USB [Natoma/Triton II] (rev 01)
00:01.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 01)
00:02.0 VGA compatible controller: Cirrus Logic GD 5446
00:03.0 Unassigned class [ff80]: XenSource, Inc. Xen Platform Device (rev 01)
[root@devops tmp]#

[root@devops tmp]# lspci

00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02)

00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II]

00:01.1 IDE interface: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II]

00:01.2 USB controller: Intel Corporation 82371SB PIIX3 USB [Natoma/Triton II] (rev 01)

00:01.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 01)

00:02.0 VGA compatible controller: Cirrus Logic GD 5446

00:03.0 Unassigned class [ff80]: XenSource, Inc. Xen Platform Device (rev 01)

[root@devops tmp]#

5. lsusb-列出USB总线信息

这个命令可列出USB控制器的设备信息。

lsusb工具是usbutils包的一部分，所以你需要按照如下命令安装：

#yum install usbutils

1	#yum install usbutils

[root@devops tmp]# yum install usbutils
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
 * base: mirrors.aliyun.com
 * extras: mirrors.aliyun.com
 * updates: mirrors.aliyun.com
Setting up Install Process
Resolving Dependencies
--&gt; Running transaction check
---&gt; Package usbutils.x86_64 0:003-4.el6 will be installed
--&gt; Processing Dependency: libusb-1.0.so.0()(64bit) for package: usbutils-003-4.el6.x86_64
--&gt; Running transaction check
---&gt; Package libusb1.x86_64 0:1.0.9-0.6.rc1.el6 will be installed
--&gt; Finished Dependency Resolution

Dependencies Resolved

============================================

============
 Package                     Arch                      Version                              

      Size
=======================================================
============
Installing:
 usbutils                    x86_64                    003-4.el6                                  

      71 k
Installing for dependencies:
 libusb1                     x86_64                    1.0.9-0.6.rc1.el6                      

      80 k

Transaction Summary
================================================================

============
Install       2 Package(s)

Total download size: 152 k
Installed size: 377 k
Is this ok [y/N]: y
Downloading Packages:
(1/2): libusb1-1.0.9-0.6.rc1.el6.x86_64.rpm                                                     

 00:00     
(2/2): usbutils-003-4.el6.x86_64.rpm                                               

 00:00     
--------------------------------------------------------

------------
Total                                                                                     

 00:00     
Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
  Installing : libusb1-1.0.9-0.6.rc1.el6.x86_64                                                                  

       1/2 
  Installing : usbutils-003-4.el6.x86_64                                                                         

       2/2 
  Verifying  : usbutils-003-4.el6.x86_64                                                                         

       1/2 
  Verifying  : libusb1-1.0.9-0.6.rc1.el6.x86_64                                                                  

       2/2 

Installed:
  usbutils.x86_64 0:003-4.el6                                                                                    

Dependency Installed:
  libusb1.x86_64 0:1.0.9-0.6.rc1.el6                                                                             

Complete!

[root@devops tmp]# yum install usbutils

Loaded plugins: fastestmirror

Loading mirror speeds from cached hostfile

* base: mirrors.aliyun.com

* extras: mirrors.aliyun.com

* updates: mirrors.aliyun.com

Setting up Install Process

Resolving Dependencies

--> Running transaction check

---> Package usbutils.x86_64 0:003-4.el6 will be installed

--> Processing Dependency: libusb-1.0.so.0()(64bit) for package: usbutils-003-4.el6.x86_64

--> Running transaction check

---> Package libusb1.x86_64 0:1.0.9-0.6.rc1.el6 will be installed

--> Finished Dependency Resolution

Dependencies Resolved

============================================

============

Package Arch Version

Size

=======================================================

============

Installing:

usbutils x86_64 003-4.el6

71 k

Installing for dependencies:

libusb1 x86_64 1.0.9-0.6.rc1.el6

80 k

Transaction Summary

================================================================

============

Install 2 Package(s)

Total download size: 152 k

Installed size: 377 k

Is this ok [y/N]: y

Downloading Packages:

(1/2): libusb1-1.0.9-0.6.rc1.el6.x86_64.rpm

00:00

(2/2): usbutils-003-4.el6.x86_64.rpm

00:00

--------------------------------------------------------

------------

Total

00:00

Running rpm_check_debug

Running Transaction Test

Transaction Test Succeeded

Running Transaction

Installing : libusb1-1.0.9-0.6.rc1.el6.x86_64

1/2

Installing : usbutils-003-4.el6.x86_64

2/2

Verifying : usbutils-003-4.el6.x86_64

1/2

Verifying : libusb1-1.0.9-0.6.rc1.el6.x86_64

2/2

Installed:

usbutils.x86_64 0:003-4.el6

Dependency Installed:

libusb1.x86_64 0:1.0.9-0.6.rc1.el6

Complete!

示例：

[root@devops tmp]# lsusb
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0627:0001 Adomax Technology Co., Ltd 
[root@devops tmp]#

[root@devops tmp]# lsusb

Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Bus 001 Device 002: ID 0627:0001 Adomax Technology Co., Ltd

[root@devops tmp]#

6. lsblk-列出块设备的信息

[root@devops tmp]# lsblk
NAME    MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
xvda    202:0    0    20G  0 disk 
└─xvda1 202:1    0    20G  0 part /
xvdb    202:16   0    10G  0 disk 
└─xvdb1 202:17   0    10G  0 part /alidata
sr0      11:0    1   362K  0 rom

[root@devops tmp]# lsblk

NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT

xvda 202:0 0 20G 0 disk

└─xvda1 202:1 0 20G 0 part /

xvdb 202:16 0 10G 0 disk

└─xvdb1 202:17 0 10G 0 part /alidata

sr0 11:0 1 362K 0 rom

7. lsscsi-列出SCSI的设备信息

列出SCSI/SDAT设备的信息，比如硬盘驱动器、光盘驱动器。

[root@devops tmp]# lsscsi
[1:0:0:0]    cd/dvd  QEMU     QEMU DVD-ROM     0.10  /dev/sr0 
[root@devops tmp]#

[root@devops tmp]# lsscsi

[1:0:0:0] cd/dvd QEMU QEMU DVD-ROM 0.10 /dev/sr0

[root@devops tmp]#

完毕！Enjoy this！

检查和收集 Linux 硬件信息的 7 个命令,布布扣,bubuko.com

检查和收集 Linux 硬件信息的 7 个命令

原文：http://www.cnblogs.com/jingzhishen/p/3732080.html

踩

(0)

评论一句话评论（0）

分享档案

更多>

2021年09月23日 (328)
2021年09月24日 (313)
2021年09月17日 (191)
2021年09月15日 (369)
2021年09月16日 (411)
2021年09月13日 (439)
2021年09月11日 (398)
2021年09月12日 (393)
2021年09月10日 (160)
2021年09月08日 (222)