自己看吧
sudo vi /etc/udev/rules.d/70-persistent-net.rules
# This is a sample udev rules file that demonstrates how to get udev to
# set the name of IPoIB interfaces to whatever you wish. There is a
# 16 character limit on network device names though, so don‘t go too nuts
#
# Important items to note: ATTR{type}=="32" is IPoIB interfaces, and the
# ATTR{address} match must start with ?* and only reference the last 8
# bytes of the address or else the address might not match on any given
# start of the IPoIB stack
#
# Note: as of rhel7, udev is case sensitive on the address field match
# and all addresses need to be in lower case.
#
# ACTION=="add", SUBSYSTEM=="net", DRIVERS=="?*", ATTR{type}=="32", ATTR{address}=="?*00:02:c9:03:00:31:78:f2", NAME="mlx4_ib3"
ACTION=="add", SUBSYSTEM=="net", DRIVERS=="?*", ATTR{type}=="1", ATTR{address}=="00:0c:29:07:fb:fc", KERNEL=="eth*", NAME="eth0"
ACTION=="add", SUBSYSTEM=="net", DRIVERS=="?*", ATTR{type}=="2", ATTR{address}=="00:0c:29:07:fb:06", KERNEL=="eth*", NAME="eth1"
-------------------------------------------------------------------------------------------------------
root@ubuntu:~$ dmesg |grep eth1
[ 2.835672] e1000 0000:02:03.0 eth1: (PCI:66MHz:32-bit) 00:0c:29:07:fb:06
[ 2.836585] e1000 0000:02:03.0 eth1: Intel(R) PRO/1000 Network Connection
root@ubuntu:~$ dmesg |grep eth2
root@ubuntu:~$ dmesg |grep eth0
[ 2.350733] e1000 0000:02:00.0 eth0: (PCI:66MHz:32-bit) 00:0c:29:07:fb:fc
[ 2.351584] e1000 0000:02:00.0 eth0: Intel(R) PRO/1000 Network Connection
[ 10.551877] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
-----------------------------------------------------------------------------
sudo vi /etc/network/interfaces?
sudo ifconfig eth1 up
=================================================
Ubuntu server 14.04 LTS 升级 16.04 LTS
sudo apt-get update && apt-get upgrade
sudo apt-get install update-manager-core
sudo vi /etc/update-manager/release-upgrades
prompt=lts
防止远程断开,安装screen工具
sudo apt-get install screen
$screen
sudo do-release-upgrade
###System upgrade is complete.
=======================================================
manroot@ubuntu:~$ cat /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
iface eth0 inet static
address 192.168.1.120
gateway 192.168.1.1
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
auto eth1
iface eth1 inet dhcp
Restart required
To finish the upgrade, a restart is required.
If you select ‘y‘ the system will be restarted.
###
sudo reboot
cat /etc/issue
====================================
#ip link 发现网卡名称改变：
sudo vi /etc/default/grub
GRUB_CMDLINE_LINUX_DEFAULT="biosdevname=0"
GRUB_CMDLINE_LINUX="net.ifnames=0 biosdevname=0"
重新生成GRUB配置并更新内核参数。
运行命令:sudo grub-mkconfig -o /boot/grub/grub.cfg?
sudo reboot
本文出自 “好日子” 博客，请务必保留此出处http://podjons.blog.51cto.com/2568563/1887131
ubuntu16.04 改变网卡名称 Ubuntu server 14.04 LTS 升级 16.04 LTS
原文：http://podjons.blog.51cto.com/2568563/1887131