Workflow Builder 2.6.3 is now certified on Windows 10 desktops for Oracle E-Business Suite 12.1 and 12.2. See:
Windows Compatibility Mode
Workflow Builder 2.6.3 is a 32-bit application that can be installed on 32-bit and 64-bit Windows 10 versions. Workflow Builder 2.6.3 must be installed with "Windows compatibility mode" set to "Windows XP (Service Pack 2)" or "Windows XP (Service Pack 3)".
Related Articles
This document provides desktop client operating system certification information for Oracle E-Business Suite desktop client products. For detailed product information, see the relevant product implementation or user guide at Oracle Applications Documentation. For further product certification information check the Certification link at My Oracle Support.
This document also describes the steps needed to run Oracle Client/Server products on servers rather than end user desktop clients.
The most current version of this document can be obtained in Document 277535.1.
There is a change log at the end of this document.
It may be preferable for all components requiring direct connection to the Oracle E-Business Suite database are deployed on servers rather than on end user desktop clients.
The Oracle E-Business Suite architecture mostly supports this requirement natively through a three-tier deployment in which end user browser sessions connect to a middle tier of servers running Oracle 9i Application Server. For the few exception cases in which Oracle E-Business Suite components or associated development tools are not directed through Oracle Application Server, it is recommended that they are deployed in a remote server environment using either Windows Server Terminal Services, Citrix or Tarantella.
This document outlines any extra set up steps that may be required to run the products recommended for this architecture. These instructions cover Windows Terminal Services, Citrix MetaFrame and Tarantella shared server software.
Special instructions and other relevant information can be found by following the various sections within this document. If you intend to run other Oracle Applications products using 3rd party software, refer to Document 122452.1 titled, ‘Global Customer Services Customization Guidelines ‘.
For further information on security in Oracle E-Business Suite 11i refer to Document 189367.1 titled, ‘Secure Configuration Guide for Oracle E-Business Suite 11i‘.
Windows 10
The certification of some of the desktop client/server products with Windows 10 within this document are currently on going. As product certification progresses we will update this document accordingly.
Disclaimer
The preceding is intended to outline our general product direction. It is intended for information purposes only, and may not be incorporated into any contract. It is not a commitment to deliver any material, code, or functionality, and should not be relied upon in making purchasing decision. The development, release, and timing of any features or functionality described for Oracles products remains at the sole discretion of Oracle.
The table below outlines the certification status of Client/Server products with Oracle E-Business Suite R11i and R12.
For further information regarding baselines or any other requirements click on the Product link.
EBS 12.x | |||||
---|---|---|---|---|---|
Product | Windows Vista | Windows 7 | Windows 8 | Windows 10 | |
Applications Desktop Integrator | Obsolete (Use WebADI instead) |
||||
Balanced Scorecard Architect | Obsolete | ||||
BI Publisher Desktop Tools (formally XML Publisher) | Certified | Not Certifed | |||
Configurator Developer Client | Certified | Certification Pending | |||
Discoverer Administrator/Desktop | Certified | Not Certified | |||
Financial Analyzer Client | Obsolete (Use Financial Analyzer Web version) |
||||
Forms/Reports Developer | Certified (Dev 10g) | ||||
JDeveloper OA Extensions | Certified (JDev 10g) | Certified for EBS 12.1.3 (JDev 10g) Certification for EBS 12.2 Pending |
|||
Sales Analyzer Client | Obsolete (Use Sales Analyzer Web version) |
||||
Sales for Handhelds (Outlook Sync Client) | Certified | Certification Pending | |||
Warehouse Builder Client | Certified | Certification Pending | |||
Workflow Builder | Certified | ||||
XML Gateway Message Designer | Certified |
Oracle E-Business Suite 11i is in extended support. There are no plans to certify any of the products listed below against Windows 10.
EBS 11i | |||
---|---|---|---|
Product | Windows Vista | Windows 7 | Windows 8 |
Applications Desktop Integrator | Obsolete (Use WebADI instead) |
||
Balanced Scorecard Architect | Obsolete | ||
BI Publisher Desktop Tools (formally XML Publisher) | Certified | Not Certified | |
Configurator Developer Client | Certified | ||
Discoverer Administrator/Desktop | Certified | Not Certified | |
Financial Analyzer Client | Obsolete (Use Financial Analyzer Web version) |
||
Forms/Reports Developer | Certified (Dev 6i) | ||
JDeveloper OA Extensions | Certified (JDev 9i) | ||
Sales Analyzer Client | Obsolete (Use Sales Analyzer Web version) |
||
Sales for Handhelds (Outlook Sync Client) | Not Certified | ||
Warehouse Builder Client | Certified | Certification Pending | |
Workflow Builder | Certified | ||
XML Gateway Message Designer | Certified |
Oracle‘s certification of the various third party client operating system, service pack levels and browsers aligns with the respective vendor‘s support life cycle.
Internet Explorer, Windows desktop operating system and service pack requirements are available from Microsoft.
To ensure that only authorized application servers are connected to the database server, ‘Application Server Security‘ should be set to ‘SECURE‘.
Information on activating server security is available in the ‘Oracle E-Business Suite Security‘ section of the ‘Best Practices for Securing Oracle E-Business Suite‘ white paper. This document can be accessed via Document 189367.1.
This information is also available in the ‘Administering Server Security‘ section within appendix G : ‘Setting Up and Maintaining Oracle Applications‘ of the ‘Oracle Applications System Administrators Guide‘.
Managed SQL*Net Access enables you to allow or restrict client access to designated database servers. This feature should be enabled to ensure that only the shared server has access to the Database. To allow your shared server direct access to the Oracle E-Business Suite database server, you must explicitly grant access as outlined below;
Oracle Applications 11.5.10 users may configure this feature automatically through AutoConfig. For further information, see Document 281758.1, titled ‘Additional Features in Oracle Applications Manager in Oracle Applications Release 11.5.10‘.
This feature may also be enabled manually in 9i and above by following the instructions in the ‘Oracle TNS Listener Security‘ -> ‘Network‘ -> ‘Add IP Restrictions or Enable Valid Node Checking‘ section of the ‘Best Practices for Securing Oracle E-Business Suite‘ white paper. This document can be accessed via Document 189367.1.
Applications Desktop Integrator client is not supported with Oracle E-Business Suite R12, use Web Applications Desktop Integrator (WebADI) instead. For further information on WebADI, see Document 417692.1 titled, ‘Installing, Configuring and Troubleshooting Web ADI (Web Applications Desktop Integrator)‘.
To set up Applications Desktop Integrator client to run on a server follow the steps below:
Install and configure Client Applications Desktop Integrator (ADI) version 7.2 as outlined in the ADI Installation Guide.
Set up an ADI user as outlined in the User Access section below, entering the correct path to the start-up program for example: [ORACLE_HOME]\bin\GLDI9032.EXE
(Where the [ORACLE_HOME]
directory is where you installed Desktop Integrator)
For information on Balanced Scorecard Architect with Oracle E-Business Suite R12 see Document 889034.1 titled, ‘Balanced Scorecard Client Patch FAQ for e-Business Suite 12‘.
To set up Balanced Scorecard Architect to run on a server, follow the steps below:
As a user with Administrator privileges, install Balanced Scorecard as outlined in the ‘Oracle Balanced Scorecard Install Guide‘.
When following the ‘Post-Installation Tasks‘ section of the install guide, for
‘Step 3 Define the Data Source Name‘ ensure you configure your ‘Data Source Name (DSN)‘ under the ‘System DSN‘ tab.
Allowing User Responsibility Access
To allow User Responsibility access to BSC you will additionally need to follow these steps;
WINNT\system32\regedit32.exe
file on the shared server.HKEY_LOCAL_MACHINE\SOFTWARE\ODBC
keySecurity
from the menu options.Full Control
of this key.Set up a Balanced Scorecard user as outlined in the User Access section below, entering the correct path to the start-up program for example;[ORACLE_HOME]\Obsc\Wizards\Architect\OBSC_Architect.exe
(Where the [ORACLE_HOME]
directory is where you installed Balanced Scorecard)
BI Publisher Desktop Tools is certified for Windows Vista users.
BI Publisher Desktop Tools (Patch 12395372) is certified for Windows 7 users.
BI Publisher Desktop Tools (Patch 12395372) is not certified for Windows 8 or Windows 10.
For further information on BI Publisher Desktop patching see Document 1138602.1, titled ‘Overview of Available Patches for Oracle XML Publisher embedded in the Oracle E-Business Suite‘.
Configurator Developer client is certified on Windows Vista, Windows 7 and Windows 8 for Oracle E-Business Suite R12.x.
To set up Configurator Developer client to run on a server, follow the steps below:
As a user with Administrator privileges, install Configurator Developer as outlined in the ‘Oracle Configurator Installation Guide‘. Also follow section ‘4.4 Oracle Configurator Developer Client/Server Environments‘ of this installation guide
Set up a Configurator Developer user as outlined in the User Access section below, entering the correct path to the start-up program for example: [ORACLE_HOME]\Developer\SPDeveloper.exe
(Where the [ORACLE_HOME]
directory is where you installed Configurator Developer)
The client release of Configurator Developer is not supported on Windows Vista, Windows 7 or Windows 8.
For further information on Discoverer certification information, see Document 233047.1 titled, ‘How To Find Oracle BI Discoverer 10g and 11g Certification Information‘.
Discoverer Administrator/Desktop is not currently certified with Windows 8 or Windows 10.
Discoverer Administrator/Desktop 11g R1 PS1 and higher is certified on Windows 7. This is only available as a 32-bit version, there are no plans to release a 64-bit version of this product.
Discoverer Administrator/Desktop 10.1.2.3 and higher is certified on Windows Vista. For installation information, see Document 564739.1 titled, ‘How to Install Oracle Discoverer Administrator / Discoverer Desktop 10g (10.1.2) on Windows Vista‘.
To set up Discoverer Administrator/Desktop to run on a server, follow the steps below:
As a user with Administrator privileges, install and configure Discoverer Administrator as outlined in its documentation.
Set up a Discoverer user as outlined in the User Access section below, entering the correct path to the start-up program for example: [ORACLE_HOME]\bin\dis51adm.exe
(Where the [ORACLE_HOME]
directory is where you installed Discoverer Administrator)
The client release of Financial Analyzer is not certified with Oracle E-Business Suite R12, use the Financial Analyzer web version instead.
The client release of Financial Analyzer is not certified on Windows Vista or Windows 7, use the Financial Analyzer web version instead.
To set up Financial Analyzer Client to run on a server, follow the steps below:
As a user with Administrator privileges, install and configure Financial Analyzer as outlined in its documentation.
Set up a Financial Analyzer user as outlined in the User Access section below, entering the correct path to the start-up program for example: [ORACLE_HOME]\olap\ofa640\thinclient\fmsplnr.exe
(Where the [ORACLE_HOME]
directory is where you installed Financial Analyzer)
Forms Developer/Reports Designer 10g are included within the Developer Suite 10g package and are certified for Oracle E-Business Suite R12.2 and 12.1 users on the following desktop client operating systems:
To install Developer Suite 10g on Windows 7, Windows 8 or Windows 10, see Document 1292919.1 titled, ‘Certification of Oracle Developer Suite 10g (10.1.2) on Windows 7 (32-bit)‘.
Forms/Reports Developer 6i is certified for Oracle E-Business Suite 11i users on the following desktop client operating systems:
If the environment PATH variable is greater than 1000 characters when attempting to install Forms Developer 6i the following error will display:
forms60.vrf(78):OS_ERROR while getting value Path
To fix this issue, reduce the number of characters in the PATH to below 1000 characters before installing.
1. Control Panel -> System -> Advanced System Settings -> Environment Variables -> System Variables: Path
2. SAVE a copy of the current Path variable as a back up to notepad or similar. (This can be restored later)
3. Reduce the Path value and add the Forms Developer 6i path (e.g. C:\Oracle\Dev6_Home\BIN) to the end, ensuring it is less than 1000 characters in total
4. Run the Forms Developer 6i installation again
5. After the installation has been completed copy back the original Path variable saved in step 2 and add the Forms Developer 6i path (e.g. C:\Oracle\Dev6_Home\BIN) to the end of the variable.
JDeveloper OA Extensions 10g is certified on Windows 10 for Oracle E-Business Suite 12.1.3
The certification of JDeveloper OA Extensions 10g on Windows 10 for Oracle E-Business Suite 12.2 is currently in progress.
JDeveloper OA Extensions 10g is certified on Windows 8.1 for Oracle E-Business Suite 12.2.x and 12.1.3.
JDeveloper OA Extensions 10g is certified on Windows Vista and Windows 7 for Oracle E-Business Suite 12.2.x and 12.1.3.
JDeveloper OA Extensions 9i has been certified for Oracle E-Business Suite 11i users (11i.ATG_PF.H.delta.7) running on Windows Vista, Windows 7 and Windows 8.1 with the following patch requirement:
Patch 8751878 9I JDeveloper with OA Extension aru for 11I RUP7 or later.
JDeveloper 9i running on Windows 7 using the (default) ‘Windows‘ ‘Look and Feel‘ will cause UI issues within the product, for example tree nodes, buttons etc. not displaying correctly. To workaround this issue Change the Look and Feel to one of the other options (CDE/Mofif, Metal or Oracle)
JDeveloper 9i running on Windows 7 using the ‘Oracle‘ ‘Look and Feel‘ will display the following problems:
To workaround these issues Change the Look and Feel to one of the other options (CDE/Mofif, Metal or Windows)
The ‘Look and Feel‘ within JDeveloper can be changed through the following menu path (using ‘Metal‘ as an example):
Tools -> Preferences -> Environment -> Look and Feel: Metal
The client release of Sales Analyzer is not certified on Windows Vista, Windows 7 or Windows 8, use the Sales Analyzer web version instead.
The client release of Sales Analyzer is not certified for Oracle E-Business Suite R12, use the Sales Analyzer web version instead.
To set up Sales Analyzer client release on a server, follow the steps below:
As a user with Administrator privileges, install and configure Sales Analyzer as outlined in its documentation.
Set up a Sales Analyzer user as outlined in the User Access section below, entering the correct path to the start-up program for example: [ORACLE_HOME]\olap\osa640\analyzer.exe
(Where the [ORACLE_HOME]
directory is where you installed Sales Analyzer)
The Outlook Sales Client on Windows 10 (32-bit & 64-bit) and Windows 8 (32-bit & 64-bit) with the Outlook (32-bit) application for Oracle E-Business Suite has not been certified.
The Outlook Sales Client for both Windows 7 (32-bit) and Windows 7 (64-bit) is certified with the Outlook (32-bit) application for Oracle E-Business Suite R12.0.6 and R12.1.1 and higher running the following patches:
Oracle E-Business Suite 12.0.6 users must apply Patch 9276863:R12.ASP.A
Oracle E-Business Suite 12.1.1 or higher users must apply Patch 9276863:R12.ASP.B
Desktop outlook synchronization client is not certified for Oracle E-Business Suite 11i users running Windows Vista, Windows 7 or Windows 8.
Warehouse Builder client has not been certified for Windows 10 or Windows 8.
Warehouse Builder client is certified for Windows 7 (32-bit) with 11GR2 (11.2) and higher.
Warehouse Builder client is certified for Windows 7 (64-bit) with 11GR2 (11.2.0.3) and higher.
For further information see Document 1073079.1 titled, ‘Oracle Warehouse Builder Certification on Windows 7‘
Warehouse Builder client is certified on Windows Vista, see Document 340955.1 for further details.
To set up Warehouse Builder client on a server, follow the steps below:
Install and configure Oracle Warehouse Builder client as outlined in the Warehouse Builder Installation Guide.
Set up a Warehouse Builder user as outlined in the User Access section below, entering the correct path to the start-up program for example: [ORACLE_HOME]\bin\launch.exe
(Where the [ORACLE_HOME]
directory is where you installed Warehouse Builder)
Workflow Builder Client 2.6.3 (Patch 6970344) is certified for Oracle E-Business Suite 12.2 and 12.1 on the following Windows desktop operating systems:
Workflow Builder Client 2.6.3 (Patch 6970344) is certified for Oracle E-Business Suite 11i on the following Windows desktop operating systems:
Note: Installation requires running the executable in Windows ‘Compatibility Mode‘. For further details see the Windows Compatibility Mode section below.
Workflow Builder Client cannot be used in conjunction with an encrypted TNS listener.
To set up Workflow Builder client on a server, follow the steps below:
Install and configure Workflow Builder as specified in the Oracle Workflow Client Installation Notes.
Set up a Workflow Builder user as outlined in the User Access section below, entering the correct path to the start-up program for example: [ORACLE_HOME]\bin\WFBLDR.EXE
(Where the [ORACLE_HOME]
directory is where you installed Workflow Builder)
(There are no plans to provide a permanent fix to this issue as the architecture changes to a JDeveloper Workflow Model in release 11iX. This will remove the requirement to run the product on a shared server.)
If you are using Workflow Builder on a WTS2000 or WTS2003 platform, and are accessing it with a ‘user‘ responsibility you will also need to run the following steps for the ‘Templates‘ and ‘Icons‘ to work correctly;
Copy the template files from [ORACLE_HOME]\wf\DATA\US
and the Icons from [ORACLE_HOME]\wf\ICON
to the root directory of the drive that you have installed Workflow Builder (for example C:\
).
XML Gateway Message Designer version 2.6.3 (Patch 6970344) is certified for Oracle E-Business Suite 12.2 and 12.1 on the following Windows desktop client operating systems:
XML Gateway Message Designer version 2.6.3 (Patch 6970344) is certified for Oracle E-Business Suite 11i on the following Windows desktop client operating systems:
Note: Installation requires running the executable in Windows ‘Compatibility Mode‘. For further details see the Windows Compatibility Mode section below.
To set up XML Gateway Client on a server, follow the steps below:
Install and configure XML Gateway Client as specified in the Oracle Workflow Client Installation Notes.
Set up a Workflow Builder user as outlined in the User Access section below, entering the correct path to the start-up program for example: [ORACLE_HOME]\ecx\MessageDesigner.bat
(Where the [ORACLE_HOME]
directory is where you installed XML Gateway)
To ensure a secure environment it is desirable to allow user access to the required product through a ‘dumb‘ window, rather than allowing desktop access. Therefore ensure that the start-up program for a particular product is specified, either against the user on the windows server where the client software is installed, or within the object or published application file if using Tarantella or Citrix.
Users should also only have User responsibility to the server rather than having access through an administrators responsibility.
A start-up program can be set against a user on a Windows server as outlined below:
Start -> All Programs -> Administrative Tasks -> Computer Management -> System Tools -> Local Users and Groups -> Users
Action -> New User
from the menu barcreate
buttonEnvironment
Tab and tick the Start the Following Program at Login
box.Program File Name
enter the path to the start-up executable file of the product this user requires access to, as specified in the Product Configuration section above.Remote Desktop Users
Group - In the User Properties Window select the Member Of
tab and add the group Remote Desktop Users
. You may also remove the defaulted Users
group.Installing certain applications on Windows Vista or Windows 7 may require installation through Windows compatibility mode. The Oracle Universal Installer (OUI) will not run successfully on these platforms so there is a requirement to run in XP compatibility mode to install the application successfully. To install an application in compatibility mode use one of the methods outlined below:
To set compatibility mode before running the executable follow these steps;
To install a product onto Windows Terminal Server you may first need to place the system into Terminal Server‘s install mode. (Terminal Server in Remote Administration mode does not use install mode). Install mode can be set by using either of the two methods below:-
1. Run the install from Add/Remove Programs Tool in the Control Panel -
2a. Set install mode from the command line -
2b. Set execute mode from the command line -
Workflow Builder 2.6.3 Certified on Windows 10 for EBS 12.x
原文:http://www.cnblogs.com/ebs-blog/p/6483275.html