This is the anatomy of one packet. It is inspired by the CAN and SAE AS-4 standards.
| Byte Index | Content | Value | Explanation |
|---|---|---|---|
| 0 | Packet start sign | v1.0: 0xFE (v0.9: 0x55) | Indicates the start of a new packet. |
| 1 | Payload length | 0 - 255 | Indicates length of the following payload. |
| 2 | Packet sequence | 0 - 255 | Each component counts up his send sequence. Allows to detect packet loss |
| 3 | System ID | 1 - 255 | ID of the SENDING system. Allows to differentiate different MAVs on the same network. |
| 4 | Component ID | 0 - 255 | ID of the SENDING component. Allows to differentiate different components of the same system, e.g. the IMU and the autopilot. |
| 5 | Message ID | 0 - 255 | ID of the message - the id defines what the payload “means” and how it should be correctly decoded. |
| 6 to (n+6) | Data | (0 - 255) bytes | Data of the message, depends on the message id. |
| (n+7) to (n+8) | Checksum (low byte, high byte) | ITU X.25/SAE AS-4 hash, excluding packet start sign, so bytes 1..(n+6) Note: The checksum also includes MAVLINK_CRC_EXTRA (Number computed from message fields. Protects the packet from decoding a different version of the same packet but with different variables). | |
原文：http://www.cnblogs.com/qiyuexin/p/7061525.html