一、实验环境部署
主服务器 192.168.18.42 端口3306 ==》 从服务器 192.168.18.44 端口 3306
主服务器 192.168.18.43 端口3306 ==》 从服务器 192.168.18.44 端口 3307
##数据库，已经安装mysql服务，安装部分略。从服务器上的多个mysql实例，请看另一篇帖子《用mysql_multi 实现一台机器跑多台mysql 》
二、部署服务器
1.在两台主服务器上赋予从机权限，有多台丛机，就执行多次（我们这里两台主库使用统一帐号密码）。
mysql> grant replication slave on *.* to ‘backup‘@‘192.168.18.44‘ identified by ‘123456‘;
Query OK, 0 rows affected (0.00 sec)
2.在主服务器上配置my.cnf
vi /etc/my.cnf
server-id = 1
log-bin = mysql-bin #保证binlog可读
read-only = 0 #主机，读写都可以
#binlog-do-db = test #需要备份数据，多个写多行，不写全部都备份
binlog-ignore-db = mysql #不需要备份的数据库，多个写多行
编辑后重启数据库 # service mysqld restart
3.配置从库服务器的my.cnf
vi /etc/my.cnf
[mysqld_multi]
mysqld = /mysql/bin/mysqld_safe
mysqladmin = /mysql/bin/mysqladmin
[mysqld1]
port = 3306
socket = /tmp/mysql3306.sock
pid-file = /data/mysql/data1/mysql3306.pid
datadir = /data/mysql/data1
skip-name-resolve
log-bin = mysql-bin-3306
log_slave_updates
expire_logs_days = 7
log-error = /data/mysql/data1/mysql3306.err
log_slow_queries = mysql3306-slow.log
long_query_time = 3
query_cache_size = 64M
query_cache_limit = 2M
slave-net-timeout = 10
server-id = 2 #server id 不要与主库的重复
master-host = 192.168.18.42 #对应主库的 ip地址
master-user = backup # slave 帐号
master-password = 123456 # 密码
master-port = 3306 #主库端口
replicate-ignore-db=mysql #跳过不备份的库
master-info-file = master.1842.info
master-connect-retry = 10
relay-log = relay-bin-1842 #中继日志
relay-log-index = relay-bin-1842
relay-log-info-file = relay-log-1842.info
default-character-set=gbk
innodb_data_home_dir = /data/mysql/data1
innodb_data_file_path = ibdata1:50M:autoextend
innodb_log_group_home_dir = /data/mysql/data1
innodb_buffer_pool_size = 3072M
innodb_file_per_table
innodb_open_files = 800
#innodb_flush_method = O_DIRECT
innodb_flush_method = O_DSYNC
skip-locking
key_buffer = 32M
max_allowed_packet = 16M
table_cache = 1024
sort_buffer_size = 8M
net_buffer_length = 8M
read_buffer_size = 2M
read_rnd_buffer_size = 8M
myisam_sort_buffer_size = 32M
max_connections = 100
read_only
wait_timeout=288000
interactive_timeout=288000
log-bin-trust-function-creators=1
replicate-ignore-db = test
replicate-ignore-table = mysql.columns_priv
replicate-ignore-table = mysql.host
replicate-ignore-table = mysql.db
replicate-ignore-table = mysql.procs_priv
replicate-ignore-table = mysql.tables_priv
replicate-ignore-table = mysql.user
[mysqld2]
port = 3307
socket = /tmp/mysql3307.sock
pid-file = /data/mysql/data2/mysql3307.pid
datadir = /data/mysql/data2
skip-name-resolve
log-bin = mysql-bin-3307
log_slave_updates
expire_logs_days = 7
log-error = /data/mysql/data1/mysql3307.err
log_slow_queries = mysql3307-slow.log
long_query_time = 3
query_cache_size = 64M
query_cache_limit = 2M
slave-net-timeout = 10
server-id = 2 #server id 不要与主库的重复
master-host = 192.168.18.43 #对应主库的 ip地址
master-user = backup # slave 帐号
master-password = 123456 # 密码
master-port = 3306 #主库端口
replicate-ignore-db=mysql #跳过不备份的库
master-info-file = master.1843.info
master-connect-retry = 10
relay-log = relay-bin-1843
relay-log-index = relay-bin-1843
relay-log-info-file = relay-log-1843.info
default-character-set=gbk
innodb_data_home_dir = /data/mysql/data2
innodb_data_file_path = ibdata1:50M:autoextend
innodb_log_group_home_dir = /data/mysql/data2
innodb_buffer_pool_size = 3072M
innodb_file_per_table
innodb_open_files = 800
#innodb_flush_method = O_DIRECT
innodb_flush_method = O_DSYNC
skip-locking
key_buffer = 32M
max_allowed_packet = 16M
table_cache = 1024
sort_buffer_size = 8M
net_buffer_length = 8M
read_buffer_size = 2M
read_rnd_buffer_size = 8M
myisam_sort_buffer_size = 32M
max_connections = 100
read_only
wait_timeout=288000
interactive_timeout=288000
log-bin-trust-function-creators=1
replicate-ignore-db = test
replicate-ignore-table = mysql.columns_priv
replicate-ignore-table = mysql.host
replicate-ignore-table = mysql.db
replicate-ignore-table = mysql.procs_priv
replicate-ignore-table = mysql.tables_priv
replicate-ignore-table = mysql.user
# 因为图方便就把参数全部抓出来了 对主从有用的也就标注的几个
4.配置完成后重启大从服务器
[root@localhost data1]# mysqld_multi --config-file=/etc/my.cnf --user=root --password=123456 report 1,2
Reporting MySQL servers
MySQL server from group: mysqld1 is running
MySQL server from group: mysqld2 is running
5.在从库上进行chang master ；
1）.在date1上
mysql -uroot -p -S /tmp/mysql3306.sock
mysql> stop slave;
Query OK, 0 rows affected (0.00 sec)
mysql> CHANGE MASTER TO
-> MASTER_HOST=‘192.168.18.43‘,
-> MASTER_PORT=3306,
-> MASTER_USER=‘backup‘,
-> MASTER_PASSWORD=‘123456‘
Query OK, 0 rows affected (0.05 sec)
mysql> start slave;
Query OK, 0 rows affected (0.00 sec)
2）。在date2上
mysql -uroot -p -S /tmp/mysql3307.sock
mysql> stop slave;
Query OK, 0 rows affected (0.00 sec)
mysql> CHANGE MASTER TO
-> MASTER_HOST=‘192.168.18.42‘,
-> MASTER_PORT=3306,
-> MASTER_USER=‘backup‘,
-> MASTER_PASSWORD=‘123456‘
Query OK, 0 rows affected (0.05 sec)
mysql> start slave;
Query OK, 0 rows affected (0.00 sec)
三、验证：
1.在大从服务器上
show slave status\G;
Slave_IO_Running: Yes
Slave_SQL_Running: Yes
2.在主库创建数据库（18.43上）
mysql> create database haifengtest;
Query OK, 1 row affected (0.00 sec)
mysql> show databases;
+--------------------+
| Database |
+--------------------+
| information_schema |
| haifengtest |
| mysql |
| test |
+--------------------+
4 rows in set (0.00 sec)
从库查看 (mysql3307.sock上）
mysql> show databases;
+--------------------+
| Database |
+--------------------+
| information_schema |
| haifengtest |
| mysql |
| test |
+--------------------+
4 rows in set (0.00 sec)
四、一种常见的问题。
在show slave status\G；时发现下面的问题，（因为我事先在从上创建了该库）
Relay_Master_Log_File: mysql-bin.000005
Slave_IO_Running: Yes
Slave_SQL_Running: No
Replicate_Do_DB:
Replicate_Ignore_DB: mysql
Replicate_Do_Table:
Replicate_Ignore_Table:
Replicate_Wild_Do_Table:
Replicate_Wild_Ignore_Table:
Last_Errno: 1007
Last_Error: Error ‘Can‘t create database ‘haifengtest‘;
database exists‘ on query. Default database: ‘haifengtest‘. Query:
‘create database haifengtest‘
如果Replication在Slave上出现上面错误而停止，一般都期望Slave能忽略这个错误，继续进行同步，而不是重新启动Slave。
这时可以使用 SQL_SLAVE_SKIP_COUNTER
mysql> SET GLOBAL SQL_SLAVE_SKIP_COUNTER = 1;
Query OK, 0 rows affected (0.00 sec)
mysql> start slave;
Query OK, 0 rows affected (0.00 sec)
在验证一次
show slave status\G;
Slave_IO_Running: Yes
Slave_SQL_Running: Yes
转载http://lhflinux.blog.51cto.com,布布扣,bubuko.com
转载http://lhflinux.blog.51cto.com
原文：http://www.cnblogs.com/dnzhu/p/3787677.html