华为9303配置流量统计的方法
【配置举例】
acl number 3000
rule 0 permit icmp source 1.1.1.1 0 destination 2.2.2.2 0 //其中1.1.1.1和2.2.2.2替换为ping测试时的源目的IP地址
rule 5 permit icmp source 2.2.2.2 0 destination 1.1.1.1 0
traffic classifier huawei
if-match acl 3000
traffic behavior huawei
statistic enable
traffic policy huawei
classifier huawei behavior huawei
interface Eth-Trunk8 //在Eth-trunk5接口下同时配置如下两条命令。
traffic-policy huawei inbound
traffic-policy huawei outbound
#查看流量统计结果命令
display traffic policy statistics interface Eth-Trunk8 inbound verbose rule-based class huawei
display traffic policy statistics interface Eth-Trunk8 outbound verbose rule-based class huawei
#清空流量统计结果命令
reset traffic policy statistics interface Eth-Trunk8 inbound
reset traffic policy statistics interface Eth-Trunk8 outbound
本文出自 “闲云野鹤,悠悠垂钓” 博客，请务必保留此出处http://cvgcv6666.blog.51cto.com/713624/1977871
原文：http://cvgcv6666.blog.51cto.com/713624/1977871