批处理 安装 网络打印机

@echo on
echo Auto to inistall print driver!!!

color 0a

rem 以下是判断端口
set count=0
:addreginfo
set /a count=%count%+1
if exist 打印机%count%.txt (set filename=打印机%count%.txt) else (goto eof)
for /f "tokens=2 delims==" %%a in (‘type %filename% ^|findstr /I "打印机IP="‘) do set pIP=%%a

if /I "%pIP%"=="LPT1:" goto addreginfo
if /I "%pIP%"=="LPT2:" goto addreginfo

rem 以下是添加端口在注册表中的信息
set regpath1=HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors\Standard TCP/IP Port\Ports\IP
set regpath2=HKEYLOCALMACHINE\SYSTEM\ControlSet001\Control\Print\Monitors\Standard TCP/IP Port\Ports\IP
@echo off
:addreg1
@reg add "%regpath1%%pip%" /v "Protocol" /d "00000001" /f /t REGDWORD >nul 2>nul
@reg add "%regpath1%%pip%" /v "Version" /d "00000001" /f /t REGDWORD >nul 2>nul
@reg add "%regpath1%%pip%" /v "HostName" /d "" /f >nul 2>nul
@reg add "%regpath1%%pip%" /v "IPAddress" /d "%pip%" /f >nul 2>nul
@reg add "%regpath1%%pip%" /v "HWAddress" /d "" /f >nul 2>nul
@reg add "%regpath1%%pip%" /v "PortNumber" /d "9100" /f /t REGDWORD >nul 2>nul
@reg add "%regpath1%%pip%" /v "SNMP Community" /d "public" /f >nul 2>nul
@reg add "%regpath1%%pip%" /v "SNMP Enabled" /d "00000000" /f /t REGDWORD >nul 2>nul
@reg add "%regpath1%%pip%" /v "SNMP Index" /d "00000001" /f /t REGDWORD >nul 2>nul

:addreg2
@reg add "%regpath2%%pip%" /v "Protocol" /d "00000001" /f /t REGDWORD >nul 2>nul
@reg add "%regpath2%%pip%" /v "Version" /d "00000001" /f /t REGDWORD >nul 2>nul
@reg add "%regpath2%%pip%" /v "HostName" /d "" /f >nul 2>nul
@reg add "%regpath2%%pip%" /v "IPAddress" /d "%pip%" /f >nul 2>nul
@reg add "%regpath2%%pip%" /v "HWAddress" /d "" /f >nul 2>nul
@reg add "%regpath2%%pip%" /v "PortNumber" /d "9100" /f /t REGDWORD >nul 2>nul
@reg add "%regpath2%%pip%" /v "SNMP Community" /d "public" /f >nul 2>nul
@reg add "%regpath2%%pip%" /v "SNMP Enabled" /d "00000000" /f /t REGDWORD >nul 2>nul
@reg add "%regpath2%%pip%" /v "SNMP Index" /d "00000001" /f /t REGDWORD >nul 2>nul
goto addreginfo
:eof

rem 以下是重新启动打印服务，使新端口生效
:restartservice
cls
echo. Don`t close this window, you are adding a printer. Please wait a minute.

echo.
echo 正在启用打印机端口...
echo.
net stop spooler >nul 2>nul
net start spooler >nul 2>nul

rundll32 printui.dll,PrintUIEntry /dl /n "TOSHIBA e-STUDIO455Series PCL6" /f "%pinf%" /r "%pIP%" /q

rem 以下是添加打印机
set count=0
:instprinter
set /a count=%count%+1
if exist 打印机%count%.txt (set filename=打印机%count%.txt) else (goto over)

for /f "tokens=2 delims==" %%a in (‘type %filename% ^|findstr "打印机IP="‘) do set pIP=%%a
for /f "tokens=2 delims==" %%a in (‘type %filename% ^|findstr "打印机名称="‘) do set pname=%%a
for /f "tokens=2 delims==" %%a in (‘type %filename% ^|findstr "打印机型号="‘) do set pmodel=%%a
for /f "tokens=2 delims==" %%a in (‘type %filename% ^|findstr "打印机INF位置="‘) do set pinf=%%a
echo.

echo.
echo.Already added, the printer information is as follows：
echo.
echo IP ：%pIP%
echo 名称 ：%pname%
echo 型号 ：%pmodel%
:echo 驱动 ：%pinf%
if /I "%pIP%"=="LPT1:" (goto ok)
if /I "%pIP%"=="LPT2:" (goto ok) else (set pip=IP%pip%)
:ok
rundll32 printui.dll,PrintUIEntry /if /b "%pname%" /f "%pinf%" /r "%pIP%" /m "%pmodel%"
goto instprinter
:over
echo.
color 0b
echo If you have any problems, please contact the administrator.
pause
exit
echo 请按任意键退出
★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★ *

网络打印服务器配置文件“打印机1.txt”的内容：

打印机IP=172.16.9.2
打印机名称=TOSHIBA e-STUDIO
打印机型号=TOSHIBA e-STUDIO455Series PCL6
打印机INF位置=E:\TOSHIBA_64\110104_Loire_CDV210_CN_XP_VISTA_X64_PLC6\Driver\eS4px6.inf

本地打印机配置文件“打印机2.txt”的内容：
打印机IP=LPT1:
打印机名称=本地HP 3050
打印机型号=HP LaserJet 3050 Series PCL 5e
打印机INF位置=D:\sysbak\打印机\hp3055\Drivers\2K_XP_Vista\hppcp501.inf

参考文档：
https://www.v2ex.com/t/291274
http://blog.51cto.com/foxtox/543685
https://zhidao.baidu.com/question/1823158923371470628.html

批处理 安装 网络打印机

原文：http://blog.51cto.com/gentleman/2063264