首页 > 其他 > 详细

告警系统主脚本、配置文件及监控项目

时间:2018-07-18 10:44:43      阅读:195      评论:0      收藏:0      [点我收藏+]
一、 告警系统主脚本

把主脚本放在/usr/local/sbin/下,以后我们的脚本都放到这个目录下面,方便查找。
然后创建目录mon
进入到mon创建子目录bin 、log、 conf、 shares、 mail
技术分享图片
1、我们的主脚本放到bin下,建立主脚本main.sh
输入以下内容:

 #!/bin/bash
#Written by aming.
# 是否发送邮件的开关,后面每一个子脚本都要执行。如果我们在维护模式下,我们要将他关闭。
export send=1
# 过滤ip地址,告诉我们发邮件是那台设备
export addr=`/sbin/ifconfig |grep -A1 "ens33: "|awk ‘/inet/ {print $2}‘`
dir=`pwd` #当前主脚本的目录
# 只需要最后一级目录名
last_dir=`echo $dir|awk -F‘/‘ ‘{print $NF}‘`
# 下面的判断目的是,保证执行脚本的时候,我们在bin目录里,不然监控脚本、邮件和日志很有可能找不到
if [ $last_dir == "bin" ] || [ $last_dir == "bin/" ]; then   #如果最后一级目录不是在bin下
    conf_file="../conf/mon.conf"    #配置文件路径
else
    echo "you shoud cd bin dir"   #提示
    exit
fi
exec 1>>../log/mon.log 2>>../log/err.log   #定义了日志和错误日志
echo "`date +"%F %T"` load average"    #定义日志时间,求出系统负载
/bin/bash ../shares/load.sh    #执行主脚本
#先检查配置文件中是否需要监控502
if grep -q ‘to_mon_502=1‘ $conf_file; then
    export log=`grep ‘logfile=‘ $conf_file |awk -F ‘=‘ ‘{print $2}‘ |sed ‘s/ //g‘`
    /bin/bash??../shares/502.sh
fi

二、 告警系统配置文件

2、告警系统配置文件首先进入到mon目录下的conf目录中,然后编辑配置文件,这里需要注意的是配置文件一定要放在conf目录下。名字也必须是mon.conf,因为我们在主脚本中已经定义完成了
mon.conf内容:

## to config the options if to monitor
## 定义mysql的服务器地址、端口以及user、password
to_mon_cdb=0? ?##0 or 1, default 0,0 not monitor, 1 monitor
db_ip=10.20.3.13
db_port=3315
db_user=username
db_pass=passwd
## httpd? ?如果是1则监控,为0不监控
to_mon_httpd=0
## php 如果是1则监控,为0不监控
to_mon_php_socket=0
## http_code_502??需要定义访问日志的路径
to_mon_502=1
logfile=/data/log/xxx.xxx.com/access.log
## request_count? ?定义日志路径以及域名
to_mon_request_count=0
req_log=/data/log/www.discuz.net/access.log
domainname=www.discuz.net

三、告警系统监控项目

1、定义shell项目-告警系统load.sh
load.sh内容:

#! /bin/bash
##Writen by aming##
load=`uptime |awk -F ‘average:‘ ‘{print $2}‘|cut -d‘,‘ -f1|sed ‘s/ //g‘ |cut -d. -f1`
if [ $load -gt 10 ] && [ $send -eq "1" ]
then
    echo "$addr `date +%T` load is $load" >../log/load.tmp
    /bin/bash ../mail/mail.sh aming_test@163.com "$addr\_load:$load" `cat ../log/load.tmp`
fi
echo "`date +%T` load is $load"

2、定义shell项目-告警系统502.sh
502.sh脚本内容:

#! /bin/bash
d=`date -d "-1 min" +%H:%M`
c_502=`grep :$d:??$log??|grep ‘ 502 ‘|wc -l`
if [ $c_502 -gt 10 ] && [ $send == 1 ]; then
? ???echo "$addr $d 502 count is $c_502">../log/502.tmp
? ???/bin/bash ../mail/mail.sh $addr\_502 $c_502??../log/502.tmp
fi
echo "`date +%T` 502 $c_502"

3、义shell项目-告警系统disk.sh
disk.sh脚本内容:

#! /bin/bash
##Writen by aming##
rm -f ../log/disk.tmp
for r in `df -h |awk -F ‘[ %]+‘ ‘{print $5}‘|grep -v Use`
do
? ? if [ $r -gt 90 ] && [ $send -eq "1" ]
then
? ? echo "$addr `date +%T` disk useage is $r" >>../log/disk.tmp
fi
if [ -f ../log/disk.tmp ]
then
? ? df -h >> ../log/disk.tmp
? ? /bin/bash ../mail/mail.sh $addr\_disk $r ../log/disk.tmp
? ? echo "`date +%T` disk useage is nook"
else
? ? echo "`date +%T` disk useage is ok"
fi

告警系统主脚本、配置文件及监控项目

原文:http://blog.51cto.com/10690709/2146197

(0)
(0)
   
举报
评论 一句话评论(0
关于我们 - 联系我们 - 留言反馈 - 联系我们:wmxa8@hotmail.com
© 2014 bubuko.com 版权所有
打开技术之扣,分享程序人生!