集群成员：
==管理节点(MGM) 进程名ndb_mgmd
==数据节点(Data Nodes) 进程名ndbd
==SQL节点(Sql Nodes) 进程名mysqld
注意：
1. 所有节点均不安装和启动mysql-server软件包，仅安装集群软件包mysql-cluster-gpl-7.3.6-linux-glibc2.5-x86_64.tar
2. Mysql Cluster采用的是NDB存储引擎，因此在建表时必须指定ENGINE为ndbcluster，这是一种内存式的存储引擎，因此对内存要求很高。
实验环境
操作系统：CentOS release 5.9 (Final) 64位
集群软件包：mysql-cluster-gpl-7.3.6-linux-glibc2.5-x86_64.tar.gz
拓扑结构
192.168.3.206 mgm
192.168.3.200/192.168.3.233 sql1/sql2
192.168.3.219/192.168.3.228 note1/note2
实现过程
一.初始配置（所有节点）
ip,iptables,selinux
如果之前有安装过mysql服务，执行以下步骤
service mysqld stop
chkconfig mysqld off
mv /etc/my.cnf /etc/my.cnf.bak
二.Installing a MySQL Cluster Binary Release on Linux
SQL nodes.
[root@sql1 ~]# ls mysql-cluster-gpl-7.3.6-linux-glibc2.5-x86_64.tar.gz
mysql-cluster-gpl-7.3.6-linux-glibc2.5-x86_64.tar.gz
[root@sql1 ~]# useradd mysql
[root@sql1 ~]# cat /etc/passwd | grep mysql
mysql:x:501:501::/home/mysql:/sbin/nologin
[root@sql1 ~]# tar xzvf mysql-cluster-gpl-7.3.6-linux-glibc2.5-x86_64.tar.gz -C /usr/local
[root@sql1 ~]# ln -s mysql-cluster-gpl-7.3.6-linux-glibc2.5-x86_64/ /usr/local/mysql
[root@sql1 ~]# cd /usr/local/mysql
[root@sql1 mysql]# scripts/mysql_install_db --user=mysql
[root@sql1 mysql]# chown -R root .
[root@sql1 mysql]# chown -R mysql data
[root@sql1 mysql]# chgrp -R mysql .
[root@sql1 mysql]# cp support-files/mysql.server /etc/rc.d/init.d/
[root@sql1 mysql]# chmod +x /etc/rc.d/init.d/mysql.server
[root@sql1 mysql]# echo "PATH=\$PATH:/usr/local/mysql/bin" >> /etc/profile
[root@sql1 mysql]# source /etc/profile
[root@sql1 mysql]# service mysql.server start
[root@sql1 mysql]# mysql
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 3
Server version: 5.6.19-ndb-7.3.6-cluster-gpl MySQL Cluster Community Server (GPL)
Copyright (c) 2000, 2014, Oracle and/or its affiliates. All rights reserved.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type ‘help;‘ or ‘\h‘ for help. Type ‘\c‘ to clear the current input statement.
mysql>
[root@sql1 mysql]# service mysql.server stop
[root@sql2 ~]#同sql1
Data nodes.
[root@note1 ~]# rsync -va 192.168.3.200:/usr/local/mysql/bin/ndbd /usr/local/bin/
[root@note1 ~]# rsync -va 192.168.3.200:/usr/local/mysql/bin/ndbmtd /usr/local/bin/
[root@note1 ~]# chmod a+x /usr/local/bin/ndb*
[root@note2 ~]#同note1
Management nodes.
[root@mgm ~]# rsync -va 192.168.3.200:/usr/local/mysql/bin/ndb_mgm* /usr/local/bin/
[root@mgm ~]# chmod a+x /usr/local/bin/ndb_mgm*
[root@mgm ~]# mkdir -p /usr/local/mysql/mysql-cluster
三.Initial Configuration of MySQL Cluster
Configuring the data nodes and SQL nodes.
[root@sql1 mysql]# vi /etc/my.cnf
[mysqld]
# Options for mysqld process:
ndbcluster
[mysql_cluster]
# Options for MySQL Cluster processes:
ndb-connectstring=192.168.3.206
[root@sql1 mysql]# rsync -va /etc/my.cnf 192.168.3.233:/etc
[root@sql1 mysql]# rsync -va /etc/my.cnf 192.168.3.219:/etc
[root@sql1 mysql]# rsync -va /etc/my.cnf 192.168.3.228:/etc
Configuring the management node.
[root@mgm ~]# mkdir /var/lib/mysql-cluster
[root@mgm ~]# cd /var/lib/mysql-cluster
[root@mgm mysql-cluster]# vi config.ini
[ndbd default]
# Options affecting ndbd processes on all data nodes:
NoOfReplicas=2 # Number of replicas
DataMemory=80M # How much memory to allocate for data storage
IndexMemory=18M # How much memory to allocate for index storage
# For DataMemory and IndexMemory, we have used the
# default values. Since the "world" database takes up
# only about 500KB, this should be more than enough for
# this example Cluster setup.
[tcp default]
# TCP/IP options:
portnumber=3306 # This the default; however, you can use any
# port that is free for all the hosts in the cluster
# Note: It is recommended that you do not specify the port
# number at all and simply allow the default value to be used
# instead
[ndb_mgmd]
# Management process options:
id=1
hostname=192.168.3.206 # Hostname or IP address of MGM node
datadir=/var/lib/mysql-cluster # Directory for MGM node log files
[ndbd]
# Options for data node "note1":
id=10
hostname=192.168.3.219 # Hostname or IP address
datadir=/usr/local/mysql/data # Directory for this data node‘s data files
[ndbd]
# Options for data node "note2":
id=11
hostname=192.168.3.228 # Hostname or IP address
datadir=/usr/local/mysql/data # Directory for this data node‘s data files
[mysqld]
# SQL node options:
id=20
hostname=192.168.3.200
[mysqld]
# SQL node options:
id=21
hostname=192.168.3.233
四.Initial Startup of MySQL Cluster
1. Management nodes
[root@mgm mysql-cluster]# ndb_mgmd -f /var/lib/mysql-cluster/config.ini
MySQL Cluster Management Server mysql-5.6.19 ndb-7.3.6
[root@mgm mysql-cluster]# ndb_mgmd -f /var/lib/mysql-cluster/config.ini --reload
2. data node
[root@note1 ~]# mkdir -p /usr/local/mysql/data
[root@note1 ~]# ndbd
2014-07-30 11:41:31 [ndbd] INFO -- Angel connected to ‘192.168.3.206:1186‘
2014-07-30 11:41:31 [ndbd] INFO -- Angel allocated nodeid: 10
[root@note2 ~]# mkdir -p /usr/local/mysql/data
[root@note2 ~]# ndbd
2014-07-30 11:41:24 [ndbd] INFO -- Angel connected to ‘192.168.3.206:1186‘
2014-07-30 11:41:24 [ndbd] INFO -- Angel allocated nodeid: 11
3. SQL node
[root@sql1 mysql]# /etc/init.d/mysql.server start
Starting MySQL.................[ OK ]
[root@sql1 mysql]# chkconfig mysql.server on
[root@sql2 mysql]# /etc/init.d/mysql.server start
Starting MySQL..............[ OK ]
[root@sql2 mysql]# chkconfig mysql.server on
4. Management nodes
[root@mgm mysql-cluster]# ndb_mgm
-- NDB Cluster -- Management Client --
ndb_mgm> show
Connected to Management Server at: localhost:1186
Cluster Configuration
---------------------
[ndbd(NDB)] 2 node(s)
id=10 @192.168.3.219 (mysql-5.6.19 ndb-7.3.6, Nodegroup: 0)
id=11 @192.168.3.228 (mysql-5.6.19 ndb-7.3.6, Nodegroup: 0, *)
[ndb_mgmd(MGM)] 1 node(s)
id=1 @192.168.3.206 (mysql-5.6.19 ndb-7.3.6)
[mysqld(API)] 2 node(s)
id=20 @192.168.3.200 (mysql-5.6.19 ndb-7.3.6)
id=21 @192.168.3.233 (mysql-5.6.19 ndb-7.3.6)
测试：
[root@sql2 mysql]# mysql
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 2
Server version: 5.6.19-ndb-7.3.6-cluster-gpl MySQL Cluster Community Server (GPL)
Copyright (c) 2000, 2014, Oracle and/or its affiliates. All rights reserved.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type ‘help;‘ or ‘\h‘ for help. Type ‘\c‘ to clear the current input statement.
mysql>
mysql>
mysql>
mysql>
mysql>
mysql>
mysql> grant all on *.* to root@‘%‘ identified by ‘456‘;
Query OK, 0 rows affected (1.73 sec)
mysql> flush privileges;
Query OK, 0 rows affected (0.25 sec)
mysql> quit
Bye
[root@sql1 mysql]# mysql -h 192.168.3.233 -u root -p456
Warning: Using a password on the command line interface can be insecure.
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 3
Server version: 5.6.19-ndb-7.3.6-cluster-gpl MySQL Cluster Community Server (GPL)
Copyright (c) 2000, 2014, Oracle and/or its affiliates. All rights reserved.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type ‘help;‘ or ‘\h‘ for help. Type ‘\c‘ to clear the current input statement.
mysql>
测试一：所有节点均正常，写入或查询
用户分别访问两台SQL节点，创建数据库，表（存储引擎为ndbcluster）
[root@sql1 mysql]# mysql
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 2
Server version: 5.6.19-ndb-7.3.6-cluster-gpl MySQL Cluster Community Server (GPL)
Copyright (c) 2000, 2014, Oracle and/or its affiliates. All rights reserved.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type ‘help;‘ or ‘\h‘ for help. Type ‘\c‘ to clear the current input statement.
mysql> show databases;
+--------------------+
| Database |
+--------------------+
| information_schema |
| mysql |
| ndbinfo |
| performance_schema |
| test |
+--------------------+
5 rows in set (0.11 sec)
mysql> create database itttw;
Query OK, 1 row affected (0.24 sec)
mysql> use itttw;
Database changed
mysql> create table t1(id int)engine=ndbcluster;
Query OK, 0 rows affected (0.14 sec)
mysql> insert into t1 values(10);
Query OK, 1 row affected (0.10 sec)
mysql>
[root@sql2 mysql]# mysql
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 8
Server version: 5.6.19-ndb-7.3.6-cluster-gpl MySQL Cluster Community Server (GPL)
Copyright (c) 2000, 2014, Oracle and/or its affiliates. All rights reserved.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type ‘help;‘ or ‘\h‘ for help. Type ‘\c‘ to clear the current input statement.
mysql> show databases;
+--------------------+
| Database |
+--------------------+
| information_schema |
| itttw |
| mysql |
| ndbinfo |
| performance_schema |
| test |
+--------------------+
6 rows in set (0.00 sec)
mysql> use itttw;
Reading table information for completion of table and column names
You can turn off this feature to get a quicker startup with -A
Database changed
mysql> show tables
-> ;
+-----------------+
| Tables_in_itttw |
+-----------------+
| t1 |
+-----------------+
1 row in set (0.00 sec)
mysql> select * from t1;
+------+
| id |
+------+
| 10 |
+------+
1 row in set (0.00 sec)
测试二：停掉Master数据节点
当前集群状态：
ndb_mgm> show
Cluster Configuration
---------------------
[ndbd(NDB)] 2 node(s)
id=10 @192.168.3.219 (mysql-5.6.19 ndb-7.3.6, Nodegroup: 0)
id=11 @192.168.3.228 (mysql-5.6.19 ndb-7.3.6, Nodegroup: 0, *) -----节点11是Master节点
[ndb_mgmd(MGM)] 1 node(s)
id=1 @192.168.3.206 (mysql-5.6.19 ndb-7.3.6)
[mysqld(API)] 2 node(s)
id=20 @192.168.3.200 (mysql-5.6.19 ndb-7.3.6)
id=21 @192.168.3.233 (mysql-5.6.19 ndb-7.3.6)
[root@note2 ~]# pkill ndbd
ndb_mgm> Node 11: Node shutdown completed. Initiated by signal 15. -----终端提示关闭完成
ndb_mgm> show
Cluster Configuration
---------------------
[ndbd(NDB)] 2 node(s)
id=10 @192.168.3.219 (mysql-5.6.19 ndb-7.3.6, Nodegroup: 0, *) -----Master数据节点切换成功
id=11 (not connected, accepting connect from 192.168.3.228)
[ndb_mgmd(MGM)] 1 node(s)
id=1 @192.168.3.206 (mysql-5.6.19 ndb-7.3.6)
[mysqld(API)] 2 node(s)
id=20 @192.168.3.200 (mysql-5.6.19 ndb-7.3.6)
id=21 @192.168.3.233 (mysql-5.6.19 ndb-7.3.6)
重新启动192.168.3.228
ndb_mgm> show
Cluster Configuration
---------------------
[ndbd(NDB)] 2 node(s)
id=10 @192.168.3.219 (mysql-5.6.19 ndb-7.3.6, Nodegroup: 0, *)
id=11 @192.168.3.228 (mysql-5.6.19 ndb-7.3.6, starting, Nodegroup: 0)
[ndb_mgmd(MGM)] 1 node(s)
id=1 @192.168.3.206 (mysql-5.6.19 ndb-7.3.6)
[mysqld(API)] 2 node(s)
id=20 @192.168.3.200 (mysql-5.6.19 ndb-7.3.6)
id=21 @192.168.3.233 (mysql-5.6.19 ndb-7.3.6)
ndb_mgm> Node 11: Started (version 7.3.6) ----节点11开始启动
ndb_mgm> show
Cluster Configuration
---------------------
[ndbd(NDB)] 2 node(s)
id=10 @192.168.3.219 (mysql-5.6.19 ndb-7.3.6, Nodegroup: 0, *)
id=11 @192.168.3.228 (mysql-5.6.19 ndb-7.3.6, Nodegroup: 0) -----启动成功
[ndb_mgmd(MGM)] 1 node(s)
id=1 @192.168.3.206 (mysql-5.6.19 ndb-7.3.6)
[mysqld(API)] 2 node(s)
id=20 @192.168.3.200 (mysql-5.6.19 ndb-7.3.6)
id=21 @192.168.3.233 (mysql-5.6.19 ndb-7.3.6)
本文出自 “sanyuan” 博客，请务必保留此出处http://sanyuan.blog.51cto.com/873226/1532732
原文：http://sanyuan.blog.51cto.com/873226/1532732