ssh
vi /etc/apt/sources.list
su
ssh username@ipaddress
eg : ssh root@172.16.247.143
实验一
fdisk /dev/sdb (create partitions)
mdadm --create /dev/md0 --level=raid0 --raid-devices=2 /dev/sdb1 /dev/sdc1 (create raid 0)
mkfs.ext3 /dev/md0 (create an ext3 filesystem on your RAID device)
mount /dev/md0 /mnt/ (mount it on /mnt)
find / -exec cp -R {} /mnt/ \; (copy files from the root filesystem to fill your new raid array with data.)
mdadm --detail /dev/md0 (show the current status of your RAID array)
umount /dev/md0 (umount your RAID array)
mdadm --stop /dev/md0 (stop /dev/md0)
cat /proc/mdstat (show running raid arrays)
/etc/init.d/mdadm-raid restart (restart the RAID service to automatically rebuild the array)
mdadm --stop /dev/md0 (stop your raid array)
rm /dev/sdc1 (delete the /dev/sdc1 special file)
/etc/init.d/mdadm-raid restart (restart the raid arrays)
mount /dev/md0 /mnt/ (mount /dev/md0)
mdadm --create /dev/md0 --level=raid1 --raid-device=2 /dev/sdb1 /dev/sdc1 (create a RAID1 array using your first two disks)
mdadm -f /dev/md0 /dev/sdc1 (simulate a hard disk fail on /dev/sdc1)
mdadm /dev/md0 --add /dev/sdd1 (add another disk to rebuild the array, add /dev/sdd1 to the array)
umount /mnt/ (umount the array)
mdadm --stop /dev/md0 (stop the array)
mdadm --zero-superblock /dev/sdb1) (erase used devices superblock.)
mdadm --create /dev/md0 --level=raid5 --raid-devices=3 /dev/sdb1 /dev/sdc1 /dev/sdd1 (create a RAID5 array using your first three disks)
df -h (show the size of your new filsystem)
hexdump /mnt/usr/sbin/groupadd (to read your files)
mdadm --remove /dev/md0 /dev/sdc1 (to remove /dev/sdc1 from /dev/md0)
mdadm --create /dev/md0 --level=raid --raid-devices=2 /dev/sdb1 /dev/sdc1 create a first RAID0 array out of your two first available disks)
mdadm --create /dev/md1 --level=raid0 --raid-devices=2 /dev/sdd1 /dev/sde1 (create a second (md1) RAID0 array from the remaining disks)
mdadm --create /dev/md2 --level=raid1 --raid-devices=2 /dev/md0 /dev/md1 (create a RAID1 out of the two RAID devices you‘ve just created)
实验二
2.1
fdisk /dev/sdb (create a physical volume out of the first hard drive you‘ve just added to the virtual machine)
pvcreate /dev/sdb1 (create a physica volume out of the partition you‘ve just created)
pvdisplay (confirm the creation by listing the currently available physical volumes)
vgcreate storage /dev/sdb1 (put your new physical volume into a volume group named "storage")
vgdisplay (list all currently available volume groups to confirm your creation)
lvcreate -L 3GB -n movies storage (create a new logical volumes in the storage volume group , movies, size 3GB)
lvcreate -L 0.9GB -n music storage (create a new logical volumes in the storage volume group, music, size 0.9 GB)
apt-get install xfsprogs (install filesystem tools as needed)
mkfs.xfs /dev/storage/movies (create an XFS filesystem on the movies logical volume)
mkfs.ext3 /dev/storage/music (add an ext3 filesystem for the music lv)
mkdir /mnt/{movies, music}
mount /dev/storage/movies /mnt/movies/ (mount this filesystem to /mnt/movies)
mount /dev/storage/music /mnt/music/ (mount this filesystem to /mnt/music)
df -h (show available disk space on your filesystems)
2.2
umount /mnt/{movies,music}
e2fsck -f /dev/storage/music
resize2fs /dev/storage/music 100M
原文：http://www.cnblogs.com/jilili/p/4379486.html