1：查看RAID控制卡信息（为了获取Enclosure Device ID，如果有多个RAID控制器，请确认需要创建RAID的物理磁盘连接在哪个RAID控制器，然后获取ID，不同控制器下的磁盘不能创建在同一个GROUP）
/opt/MegaRAID/MegaCli/MegaCli64 -cfgdsply -aALL |grep ‘Enclosure Device ID‘
返回结果：
Enclosure Device ID: 32
2：创建RAID10
/opt/MegaRAID/MegaCli/MegaCli64 -CfgSpanAdd -r10 -Array0[32:4,32:5] -Array1[32:6,32:7] WB Direct -a0
命令解释：
CfgSpanAdd：创建RAID命令
-r10 :RAID10，如果创建RAID5，则为-r5
-Array0[32:4,32:5] : RAID10相当于RAID1+RAID0，本例中为磁盘编号为4的物理磁盘和编号为5的物理磁盘组成一个RAID1，磁盘编号为6的物理磁盘和编号为7的物理磁盘组成一个RAID1，然后两个RAID1组成一个RAID0。（其中32为第一步取得的）
-Array1[32:6,32:7]同上解释
WB ：缓存策略，支持的策略可以使用以下命令查看：
/opt/MegaRAID/MegaCli/MegaCli64 -LDGetProp -Cache -L0 -a0
返回信息：
Adapter 0-VD 0(target id: 0): Cache Policy:WriteBack, ReadAdaptive, Direct, Write Cache OK if bad BBU
Direct：缓存策略，查看方式同上条命令
-a0:即adpter0，RAID卡0，如果有更多RAID卡，请确认当前要操作的适配器，可用下面命令查看
/opt/MegaRAID/MegaCli/MegaCli64 -AdpAllInfo -aAll
创建RAID10命令的返回结果：
proc_add_new_ld: scandir failed
Failed while adding the configuration to OS.
Exit Code: 0xfffffffe
实际上已经创建成功，重启服务器即可生效。
3：重启服务器后使用以下命令查看RAID情况：
/opt/MegaRAID/MegaCli/MegaCli64 -LDInfo -LALL -aAll
返回结果如下：
Adapter 0 -- Virtual Drive Information:
Virtual Drive: 0 (Target Id: 0)
Name :raid-10
RAID Level : Primary-1, Secondary-0, RAID Level Qualifier-0
Size : 557.75 GB
Mirror Data : 557.75 GB
State : Optimal
Strip Size : 64 KB
Number Of Drives per span:2
Span Depth : 2
Default Cache Policy: WriteBack, ReadAdaptive, Direct, Write Cache OK if Bad BBU
Current Cache Policy: WriteBack, ReadAdaptive, Direct, Write Cache OK if Bad BBU
Default Access Policy: Read/Write
Current Access Policy: Read/Write
Disk Cache Policy : Disk‘s Default
Encryption Type : None
Default Power Savings Policy: Controller Defined
Current Power Savings Policy: None
Can spin up in 1 minute: Yes
LD has drives that support T10 power conditions: Yes
LD‘s IO profile supports MAX power savings with cached writes: No
Bad Blocks Exist: No
Is VD Cached: Yes
Cache Cade Type : Read Only
Virtual Drive: 1 (Target Id: 1)
Name :
RAID Level : Primary-1, Secondary-0, RAID Level Qualifier-0
Size : 1.818 TB
Mirror Data : 1.818 TB
State : Optimal
Strip Size : 64 KB
Number Of Drives per span:2
Span Depth : 2
Default Cache Policy: WriteBack, ReadAdaptive, Direct, No Write Cache if Bad BBU
Current Cache Policy: WriteBack, ReadAdaptive, Direct, No Write Cache if Bad BBU
Default Access Policy: Read/Write
Current Access Policy: Read/Write
Disk Cache Policy : Disk‘s Default
Encryption Type : None
Default Power Savings Policy: Controller Defined
Current Power Savings Policy: None
Can spin up in 1 minute: Yes
LD has drives that support T10 power conditions: No
LD‘s IO profile supports MAX power savings with cached writes: No
Bad Blocks Exist: No
Is VD Cached: Yes
Cache Cade Type : Read Only
Exit Code: 0x00
4：查看RAID初始化情况：
/opt/MegaRAID/MegaCli/MegaCli64 -LDBI -ShowProg -LALL -aALL
返回结果如下：
Background Initialization on VD #0 is not in Progress.
Background Initialization on VD #1 (target id #1) Complete 9% in 18 Minutes.
表明VD 1正在初始化，18分钟完成了9%（此时已可以使用，控制器在后台初始化RAID组）
如果需要删除RAID，使用以下命令：（慎用）
/opt/MegaRAID/MegaCli/MegaCli64 -CfgLdDel -L1 -a0
删除RAID控制器0上的编号为1的逻辑磁盘
返回结果如下：
Adapter 0: Deleted Virtual Drive-1(target id-1)
Exit Code: 0x00
本文出自 “运维开发” 博客，请务必保留此出处http://zhupengyue.blog.51cto.com/227198/1395557
megacli创建RAID10过程详解,布布扣,bubuko.com
原文：http://zhupengyue.blog.51cto.com/227198/1395557